Publications

2024

Daniel Jäger, Patrick Steudel, Volker Gümmer: The Fundamental Research And New Concepts Compressor - LTF’s new low-speed axial compressor test rig for atmospheric and sub-atmospheric operation. ISABE-2024, 2024 more…
Gutierrez Lupinta Gladys, Giannini Samuele, Gümmer Volker: Numerical Investigation of Air Injection in the Endwall Region of a Highly-Loaded Compressor Tandem Stator Configuration. ISABE-2024, 2024 more…
M. Luz Guilherme: Applicability of Heat Pipes and Impingement Cooling for Axial Compressor Tip Clearance Control. ISABE-2024, 2024 more…
Rabl Alexander, Rohkamp Marius, Reza Saraji-Bozorgzad Mohammad, Helcig Christian, Sallinen Reetu, Vilja Jesse, Bendl Jan, Adam Thomas, Hupfer Andreas, Gümmer Volker: Gaseous and Particulate Emissions of an Allison 250-C20B Turboshaft Engine Running on HEFA-SPK and its Jet A-1 Blends. Turbo Expo: Power for Land, Sea and Air - Volume 2: Ceramics and Ceramic Composites; Coal, Biomass, Hydrogen, and Alternative Fuels, 2024 more…
Speck Konstantin, Rabl Alexander, Helcig Christian, Gümmer Volker: Development and Validation of a Methodology for Numerical Calibration of Five-Hole Probes. ISABE-2024, 2024 more…

2023

Giannini, S., Luz, G. M., von Jeinsen, P., Straccia, M., and Gümmer, V: Numerical Investigation of the Influence of the Degree of Reaction in an Axial Compressor Stage With Tandem Vanes. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, more…
Giannini, S., Luz, G. M., von Jeinsen, P., Straccia, M., and Gümmer, V.: Numerical Investigation of the Influence of the Degree of Reaction in an Axial Compressor Stage With Tandem Vanes. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, more…
M. Rosenzweig , R. D. Sandberg , S. Giannini and T. O. Jelly: High-Fidelity Simulation and Flow Analysis of a Low-Pressure Turbine Cascade in a Spanwise-Diverging Gas Path - Part I: Calibration of Inlet Boundary Conditions. 23rd Australasian Fluid Mechanics Conference - 23AFMC, 2023 more…
Rabl, A., Mull, C, Härtl, M., Helcig, C., Gümmer, V.: Experimental investigation of performance and soot emissions of oxygenated fuel blends in a small aero engine. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, more…
Rohkamp, M., Rabl, A., Gündling, B., Reza Saraji-Bozorgzad, M., Mull, C., Bendl, J., Neukirchen, C., Helcig, C., Adam, T., Gümmer, V., Hupfer, A.: Detailed Gaseous and Particulate Emissions of an Allison 250-C20B Turboshaft Engine. Journal of Engineering for Gas Turbines and Power., 2023 more…
Schäffer, Christian; Rabl, Alexander; Speck, Konstantin; Boetzel, Kiyan; Helcig, Christian; Gümmer, Volker: Challenges in the Application of Hot-Wire Anemometry for the Investigation of Transient Temperature Fluctuations in a High-Speed Research Compressor. ASME Turbo Expo, American Society of Mechanical Engineers, 2023 more…
Speck, K; Schäffer, C; Gümmer, V: Design of a small pressure chamber to evaluate probe calibrations at varying Reynolds numbers. Journal of Physics: Conference Series 2511 (1), 2023, 012023 more…

2022

J. Eckel, P. von Jeinsen, V. Gümmer: Numerical Investigation of Near-Tip Modifications for a Highly Loaded Low-Speed Rotor Under the Influence of Double Leakage. Journal of Turbomachinery, 2022 more…
J. Petermann, B. Becker and V. Gümmer: Platform Leakage and Blade Tilting in Axial Compressor CFD-Simulations. 25th Conference of the International Society for Air Breathing Engines, 2022 more…
J. Petermann, M. Pommerening, B. Becker and V. Gümmer: Numerical Analysis of Blade Platform Leakage in Axial Compressors. ASME Turbo Expo 2022 Turbomachinery Technical Conference and Exposition, 2022 more…
M. Straccia, S. Giannini, V. Gümmer: Analysis of Cavity Leakage Effects on Coupled Non-Axisymmetric Endwall-Arifoil Optimization in a Low-Speed Compressor Tandem Stator. ASME, 2022 more…
Richard Nowak Delgado; Philippe Bieli; Thorben de Riese; Sebastian Fendt; Hartmut Spliethoff: Influence of additive surface area degradation on fine particle formation during biomass pulverised-fuel combustion. Elsevier, 2022 more…
S. Giannini, M. Straccia, V. Gümmer: Robust Optimization Used in the Redesign of a Low-Speed Compressor Tandem Stator. ISABE 2022, 25th ISABE Conference, 2022 more…
Schäffer, Christian; Speck, Konstantin; Gümmer, Volker: Numerical Calibration and Investigation of the Influence of Reynolds Number on Measurements With Five-Hole Probes in Compressible Flows. Journal of Turbomachinery 144 (9), 2022 more…
Speck, Konstantin; Schäffer, Christian; Gümmer, Volker: Design of a Small Pressure Chamber to Evaluate Probe Calibrations at Varying Reynolds Numbers. XXVI Biennial Symposium on Measuring Techniques in Turbomachinery, 2022 more…

2021

Eckel, Jannik; Gümmer, Volker: Numerical Investigation of the Aerodynamic Performance of Hybrid Aerofoils in a 1.5-Stage Low-Speed Compressor. Volume 2A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics, American Society of Mechanical Engineers, 2021 more…
J. Eckel, V. Gümmer: Numerical Investigation of the Aerodynamic Performance of Hybrid Aerofoils in a 1.5-Stage Low-Speed Compressor. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, 2021 more…
Köhler, Christian Peter; Helcig, Christian; Gümmer, Volker: Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage. 14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, European Turbomachinery Society, 2021 more…
Schäffer, Christian; Speck, Konstantin; Gümmer, Volker: Numerical Calibration and Investigation of the Influence of Reynolds Number on Measurements With Five-Hole Probes in Compressible Flows. ASME Turbo Expo, 2021 more…

2020

Aus der Wiesche, S., Helcig, C.: Effect of Heating on the Stability of the Three-Dimensional Boundary Layer Flow over a Rotating Disk. . Biennial Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 2020 more…
Eckel, J., Gümmer, V.: Numerical Investigation of Compressor Tandem Aerofoils Featuring Near-Endwall Modification. 18th Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC, 2020 more…
Fuchs, F., Gümmer, V.: Helicpoter Engine Performance Simulations Accounting for Intake Distortion. Deutscher Luft- und Raumfahrtkongress DLRK, 2020 more…
Kendall-Torry, C., Gümmer, V.: Design of a rear-stage subsonic axial compressor with casing treatments. CEAS Aeronautical Journal (ISSN 1869-5582), 2020 more…
Kuen, N., Gümmer, V.: Experimental Investigation of the Starting Provedure of a Helicopter Gas Turbine Featuring an Impingment Quick-start System. ASME Turbo Expo 2020, 2020 more…
Schlüter, D., Grewe, R. P., Wartzek, F., Liefke, A., Werner, J., Kunkel, C., Gümmer, V.: Reduced-Order Modelling of Rotating Stall. ASME International Gas Turbine & Aero Engine Technical Congress, 2020 more…
Schmidt, T., Gümmer, V., Konle, M.: Potential of Surrogate Modeling in Compressor Casing Design Focusing Rapid Tip Clearance Assessments. 65th ASME International Gas Turbine & Aero Engine Technical Congress, 2020 more…
Zhang, C., Gümmer, V.: Multi-Objective Optimization and System Evaluation of Recuperated Helicopter Turboshaft Engines. Journal of Energy, 2020 more…
aus der Wiesche, Stefan; Helcig, Christian: Effect of Heating on the Stability of the Three-Dimensional Boundary Layer Flow over a Rotating Disk. Proceedings of the XXV Biennial Symposium on Measuring Techniques in Turbomachinery, 2020, 10 more…

2019

De Dominicis, I.; Robens, S.; Wolfrum, N.; Lange, M.; Gümmer, V.: Interacting Flow Effects in the Stages of a Low-Speed Multistage Axial Compressor Using Shrouded and Cantilevered Stators. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 more…
Hopfinger, M.; Gümmer, V.: Preliminary Design of a Three-Stage Low-Speed Research Compressor Using Tandem Vanes. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 more…
J. Petermann, Yong Su Jung, J. Baeder and J. Rauleder: Validation of Higher-Order Interactional Aerodynamics Simulations on Full Helicopter Configurations. Journal of the American Helicopter Society Volume 64, Number 4, 2019, 1-13 more…
M., Straccia; R., Hofmann; V., Gümmer: New Methods for Secondary Flow Phenomena Visualization and Analysis. ASME Turbo Expo, 2019 more…
P., Lungu; C., Bauer; O., Haidn: Design Aspects and Characterization of a Resonance Igniter or Oxygen/Methane in Orbit Propulsion Systems. 8th European Conference for Aeronautics and Space Sciences, 2019 more…
Schmieder, M.; Erhard, W.; Gümmer, V.; Aalburg, C.; Schuler, P.; Schneider, C. P.; Pannekeet, R. C.; Vallikivi, M.: Development and Commissioning of a High-Speed Research Compressor Facility. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 more…
Schrapp, H.; Dodegge, A.; Gümmer, V.; Harvey, N. W.; Friedrichs, J.; Städing, J.: Reducing compressor shroud leakage flow bai raising the stator hub line: low speed tests. ASME Turbo Expo, 2019 more…
T., Schmidt; J., Lorenz; V., Gümmer; A., Hupfer: Structural Analysis of an Auxetic Casing Structure Incorporating Tip Blowing Casing Treatment Modification. ASME Turbo Expo, 2019 more…
T., Schmidt; V., Gümmer; M., Konle: Quantification of the Effect of Circumferential Repeated 3D Features on Radial Displacement of a Compressor Casing Focusing Model Simplification: Part I. 8th International Conference on Mechanics and Industrial Engineering, 2019Paper No. ICMIE 122 more…
Zhang, C.; Gümmer, V: The potential of helicopter turboshaft engines incorporating highly effective recuperators under various flight conditions. Aerospace Science and Technology 88, 2019, 84-94 more…
Zhang, C.; Gümmer, V.: High temperature heat exchangers for recuperated rotorcraft powerplants. Applied Thermal Engineering 154 (25), 2019, 548-561 more…
Zhang, C.; Gümmer, V.: Optimization design analysis of primary surface recuperator for rotorcraft powerplant applications. ASME Turbo Expo, 2019 more…
Zimmermann, A.-L.; Graiff, M.; Tran, Nguyen; T., Q.; Gümmer, V.: Pressure-sensitive paint measurements in narrow clearances - a feasibility study. ASME Turbo Expo, 2019 more…
aus der Wiesche, Stefan; Helcig, Christian: Stagnation Flow and Heat Transfer From a Finite Disk Situated Perpendicular to a Uniform Stream. Journal of Fluids Engineering 142 (3), 2019, 15 more…

2018

Fuchs, F.; Schäffer, C.; Gümmer, V.: Experimental Investigation of a Radial Turboshaft Engine intake. 54nd AIAA/SAE/ASEE Joint Propulsion Conference, 2018 more…
Helcig, Christian: Experimentelle Untersuchung des Wärmeübergangs an Rotierenden Scheiben. Dissertation, 2018 more…
Kapitz, Marek; Teigeler, Christian; Wagner, Robert; Helcig, Christian; aus der Wiesche, Stefan: Experimental study of the influence of the Prandtl number on the convective heat transfer from a square cylinder. International Journal of Heat and Mass Transfer 120, 2018, 471--480 more…
Kerler, M.: Quick Start - Von 0 auf 30.000 Umdrehungen in 2,6 Sekunden. dSPACE Magazin 1, 2018, 31-35 more…
Kerler, M.: Control Systems Enables Helicopter Engine Quick Start. Aerospace Testing International, 2018 more…
Petermann J., Yong Su Jung, Baeder J. and Rauleder J.: Higher-Order Simulations of Interactional Aerodynamics on Full Helicopter Configurations Using a Hamiltonian Strand Approach. 44th European Rotorcraft Forum, 2018 more…
Zimmermann, A.-L.; T., Nguyen Tran Q.; Giepman, R. H. M.; Gümmer, V.: Experimental Investigation and Numerical Validation of the Bearing Face Flow of an Adaptive Seal. ASME Turbo Expo, 2018 more…

2017

Helcig, Christian; aus der Wiesche, Stefan; Shevchuk, Igor V.: Prandtl Number Effect on the Laminar Convective Heat Transfer From a Rotating Disk. Journal of Heat Transfer 139 (10), 2017, 10 more…
Inzenhofer, A.; T., Lahni; Gümmer, V.; Becker, B.; Grothe, P.; Heinichen, F.: Using Annulus Contouring to Compensate Compressor Mis-Matching Effects in the Presence of Casing Treatments. 23rd International Symposium on Air Breathing Engines, 2017 more…
Inzenhofer, André; Haikonen, Joona; Hupfer, Andreas: Multiobjective topology optimization with the sko-method. Structural and Multidisciplinary Optimization 57, 2017, 325-340 more…
Kerler, M.; Schäffer, C.; Erhard, W.; Gümmer, V.: Experimental Investigation of an Engine Quick-Start System with Compact Air Supply for Rotorcraft Application. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2017 more…
Kerler, M.; Schäffer, C.; W. Erhard, V. Gümmer: Operational Aspects of an Engine Quick-Start System with Compact Air Supply for Rotorcraft Application. Deutscher Luft- und Raumfahrtkongress, 2017 more…
Paukner, D.; Nowak, J.; Gümmer, V.; Haidn, O.: Improved flammability for hydrogen fuelled scramjets with preinjection catalytic radical farming. 23rd International Symposium on Air Breathing Engines, 2017 more…
Schmidt, Tobias; Eisenmann, Sina; Velikov, Velislav; Hupfer, Andreas; Gümmer, Volker: Analysis of an Auxetic Casing Structure for Tip Clearance Control under Various Temperature and Pressure Conditions. 23rd International Symposium on Air Breathing Engines, 2017 more…
Zimmermann, A.-L; Giepman, Rogier; Nguyen, Tue; Aalburg, Christian; Gümmer, V: Design of a static test rig for advanced seals and air bearing testing. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2017 more…

2016

A, Inzenhofer.; A, Hupfer.; J, Seppäla.: Entwicklung eines evolutionären Algorithmus zur Mehrziel-Topologieoptimierung. 3rd German-language NAFEMS Regional Conference, 2016 more…
Eisenmann, S.; Schmidt, T.; Gümmer, V.; Hupfer, A.: Fatigue Analysis of a Cylindrical Turbine Disk with Integrated Heat Pipes. 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016 more…
Fuchs, F.; Meidinger, V.; Neuburger, N.; Reiter, Th.; Zündel, M.; Hupfer, A.: Challenges in designing very small jet engines - fuel distribution and atomization. 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2016 more…
Helcig, Christian; aus der Wiesche, Stefan: Effect of Prandtl Number on the Heat Transfer from a Rotating Disk: An Experimental Study. ASME Summer Heat Transfer Conference, 2016 more…
Helcig, Christian; aus der Wiesche, Stefan: Experimental Investigation of the Laminar Boundary Layer Flow on a Rotating Wavy Disk. ASME Fluids Engineering Division Summer Meeting, 2016 more…
Helcig, Christian; aus der Wiesche, Stefan: Effect of Prandtl Number on Convective Heat Transfer in the Separated and Reattached Flow Region on a Blunt Flat Plate. ASME Fuids Engineering Division Summer Meeting, 2016 more…
Inzenhofer, André; Guinet, Cyril; Hupfer, Andreas; Becker, Bernd; Grothe, Patrick: Difference in the Working Principle of Axial Slot and Tip Blowing Casing Treatments. ASME Turbo Expo, 2016GT2016-56966 more…
Kendall-Torry, C.; Danner, F.: Investigation On Direct And Hybrid Sound Prediction. ASME Turbo Expo (GT2016-57612), 2016 more…
Kerler, M.; Heibel, Y.; Erhard, W.: Evaluation of Future Helicopter Powertrain Concepts Regarding Flight Mission and Operational Aspects. 72nd American Helicopter Society International Annual Forum, 2016 more…
Kerler, M.; Schäffer, C.; Erhard, W.; Gümmer, V.: Design of an Airworthy Turboshaft Engine Quick-Start System with Compact Pressurized Air Supply for Rotorcraft Application. 42nd European Rotorcraft Forum, 2016 more…
Kerler, M.; Schäffer, C.; Erhard, W.; Gümmer, V.: Design Parameter Identification of the Air Supply for a Turboshaft Engine Quick-Start System. 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016AIAA-2016-5062 more…
Sezal, Ismail; Chen, Nan; Aalburg, Christian; Kumar, Rajesh; Gadamsetty, V.; Erhard, Wolfgang; Greco, Alberto Scotti Del; Tapinassi, Libero; Lang, Matthias: Introduction of Circumferentially Nonuniform Variable Guide Vanes in the Inlet Plenum of a Centrifugal Compressor for Minimum Losses and Flow Distortion. Journal of Turbomachinery 138 (9), 2016, 10 more…
aus der Wiesche, Stefan; Helcig, Christian: Francis A. Kulacki, Minnesota, USA (Ed.): Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air. SpringerBriefs in Applied Sciences and Technology Thermal Engineering and Applied Science. Springer International Publishing, 2016 more…

2015

Eisenmann, S.; Körner, R.; Hupfer, A.: Transient Simulation of a Gas Turbine Disk Incorporating Heat Pipes under Structural Aspects. ASME Turbo Expo, 2015 more…
Eisenmann, S.; Primavera, A.; Hupfer, A.: Rotating Heat Pipes with a Focus on Stress Concentrations. 22nd ISABE Conference, 2015 more…
Guinet, C.; Inzenhofer, A.; Gümmer, V.: Influencing Parameters of Tip Blowing Interacting with Rotor Tip Flow. ASME Turbo Expo, 2015 more…
Helcig, Christian; Turnow, Johann; aus der Wiesche, Stefan: Turbulent Heat Transfer on a Blunt Flat Plate with Passive Jet Injection. 8th International Symposium on Turbulence, Heat and Mass Transfer, Begell House Inc., 2015 more…
Helcig, Christian; aus der Wiesche, Stefan; Uhkoetter, Stephan: Aerodynamic Investigation of a Passive Secondary Jet Exciting a Separation Bubble for a Blunt Flat Plate. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, 2015 more…
Inzenhofer, A.; Guinet, C.; Hupfer, A.; Schrapp, H.; Gümmer, V.: Influence of a Tip Blowing Casing Treatment on the Stator Flow Field. 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015 more…
Kerler, M.; Elfner, J.; Erhard, W.: Investigation of Engine Operating Behavior after Compressor Casing Modification due to Installation of a Quick-Start System. 22nd ISABE Conference, 2015 more…
Kerler, M.; Schäffer, C.; Erhard, W.: Design of an Engine Quickstart System for Rotorcraft Application. 11th European Turbomachinery Conference, 2015 more…
Rahn, D.; Schmidt, R.; Greif, F.; Hupfer, A.: Untersuchungen zu Düsenströmungen kleiner Fluggasturbinen. Deutscher Luft- und Raumfahrtkongress, 2015 more…
Sezal, I.; Gadamsetty, R. Kumar V; Lang, M.; Aalburg, C.; Chen, N.; Erhard, W.; Greco, A. Scotti Del; Tapinassi, L.: Introduction of circumferentially non-uniform variable Guide Vanes in the Inlet Plenum of a centrifugal Compressor for minimum Losses and Flow Distortion. ASME Turbo Expo, 2015 more…

2014

Danner, F.; Kendall-Torry, C.: Effect of Blade Tip Modifications for Unducted Propulsors on Tip Vortex-Rotor Interaction Noise. ASME Turbo Expo, 2014 more…
Danner, F.; Kendall-Torry, C.; Kau, H. P.: Tailoring Rotor-Rotor Interactions Using Blade Row Spacing for Effects of Destructive Acoustic Interference. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2014 more…
Eisenmann, S.; Mair, M.; Hupfer, A.: Structural Analysis of a Gas Turbine Disk Containing Heat Pipes Using Finite Element Analysis. ASME Turbo Expo, 2014 more…
Guinet, C.; Bettrich, V.; Gümmer, V.: Parametric Study of the Bleed Position in a Tip Blowing Casing Treatment. ASME Turbo Expo, 2014 more…
Guinet, C.; Streit, J. A.; Gümmer, V.; Kau, H. -P.: Tip Gap Variation on a Transonic Rotor in the Presence of Tip Blowing. ASME Turbo Expo, 2014 more…
Helcig, Christian; Uhkoetter, Stephan; aus der Wiesche, Stefan: Flow Over a Blunt Disk With Incidence: Location of Stagnation Point and Flow Separation. 4th Joint US-European Fluids Engineering Division Summer Meeting, 2014 more…
Helcig, Christian; aus der Wiesche, Stefan: Convective Heat Transfer From a Free Rotating Disk Subjected to a Forced Crossflow. ASME Turbo Expo, 2014 more…
Helcig, Christian; aus der Wiesche, Stefan; Shevchuk, Igor V.: Internal Symmetries, Fundamental Invariants, and Convective Heat Transfer from a Rotating Disk. 15th International Heat Transfer Conference, 2014 more…
Hupfer, A.; Hirndorf, D.: Investigation of Parameters Affecting the Thermodynamic Cycle of Very Small Jet Engines. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2014 more…
Kerler, M.; Erhard, W.: Evaluation of Helicopter Flight Missions with Intended Single Engine Operation. 40th European Rotorcraft Forum, 2014 more…
Lang, S.; Erhard, W.; Kau, H. P.; Pannekeet, R.; Aalburg, C.; de Nazelle, R. du Cauze: Application of Flow Control on a radial Compressor for Operating Range Extension. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2014 more…
Loos, A.; Kau, H. P.: Numerical Investigations of Hub Treatments for Cantilever Stators. 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2014 more…
Seppälä, J.; Hupfer, A.: Topology Optimization in Structural Design of a LP Turbine Guide Vane: Potential of Additive Manufacturing for Weight Reduction. ASME Turbo Expo, 2014 more…
Seppälä, J.; Kraus, D.; Hupfer, A.: Thermo-elastic optimization for additively manufactured turbo machinery components. 7th Annual European Altair Technology Conference, 2014 more…
Seppälä, J.; Rockel, D.; Hupfer, A.: Performance and Functionality Based Design Methods for Improved and Novel Aircraft Engine Components for Additive Manufacturing. 25th Annual International Solid Freeform Fabrication Symposium, 2014 more…
Seppälä, J.; Rockel, D.; Hupfer, A.: New Possibilities of Additive Manufacturing in Aero Engine Component Design - Topology Optimized Turbine Stator. Fraunhofer Direct Digital Manufacturing Conference, 2014 more…
Spieß, C.; Kerler, M.; Hajek, M.: Effects on Helicopter Dynamics in Case of Engine Failure During Intended Single Engine Operation. 40th European Rotorcraft Forum, 2014 more…

2013

D., Rockel; A., Hupfer; H.P., Kau: An evaluation of the potential of additive manufacturing technologies in future aero engine design. ASME Turbo Expo, 2013 more…
Danner, F.; Kendall-Torry, C.; Kau, H. P.: Aerodynamic Origin of Rotor-Rotor Interaction Noise from Unducted Propulsors. ASME Turbo Expo, 2013 more…
Helcig, Christian; aus der Wiesche, Stefan: The effect of the incidence angle on the flow over a rotating disk subjected to forced air streams. ASME Fluids Engineering Division Summer Meeting, 2013 more…
J. Deeken, D. Suslov, S. Schlechtriem, O. Haidn: Impact of injection distribution on cryogenic rocket engine stability. Progress in Propulsion Physics 4, 2013, 149-166 more…
Kerler, M.; Hönle, J.; Kau, H. P.: Modeling of BO 105 Flight Dynamics for Research on Fuel Saving due to Single-Engine Operation. 39th European Rotorcraft Forum, 2013 more…
Loos, A.; Mayenberger, T.; Danner, F.; Kau, H. P.: Evolution of Generic Vanelets Applied to a High Pressure Compressor. ASME Turbo Expo, 2013 more…
Mayenberger, T.; Brignole, G.; Kau, H. P.: Aerodynamic Design of Abradable Liners with Integrated Endwall Treatments for Axial Compressor Rotors. ASME Turbo Expo, 2013 more…
Rockel, D.; Hupfer, A.; Kau, H. P.: An Evaluation of the Potential of Additive Manufacturing Technologies in Future Aero Engine Design. ASME Turbo Expo, 2013 more…
Rockel, D.; Weihard, S.; Hupfer, A.; Kau, H. P.: Numerical Investigation of an Additively Manufactured Compressor Casing: The Effect of Auxetic Structures on the Tip Clearances. ASME Turbo Expo, 2013 more…
Streit, J. A.; Brandstetter, C.; Heinichen, F.; Kau, H. P.: An advanced axial-slot casing treatment on a transonic compressor – A close look with computational fluid dynamics and experimental validation. ASME Turbo Expo, 2013 more…
Streit, J. A.; Heinichen, F.; Kau, H. P.: Axial-Slot Casing Treatments Improve the Efficiency of Axial Flow Compressors: Aerodynamic Effects of a Rotor Redesign. ASME Turbo Expo, 2013 more…
Weihard, S.; Hupfer, A.; Kau, H. P.: Untersuchung der Exzentrizität von Gehäuseringen infolge statistisch verteilter Fertigungsabweichungen. Deutscher Luft- und Raumfahrtkongress, 2013 more…
Weihard, S.; Hupfer, A.; Kau, H. P.: Statistical Impact of Manufacturing Tolerances on Axial Gaps Between Vane Segments and the Rotor of Axial Flow Turbo-Compressors. ASME Turbo Expo, 2013 more…

2012

Borm, O.: Instationäre numerische Untersuchung der aerodynamischen Rotor-Stator-Interaktion in einem Radialverdichter. Dissertation, 2012 more…
Borm, O.; Kau, H. -P.: Unsteady Aerodynamics of a Centrifugal Compressor Stage - Validation of Two Different CFD Solvers. ASME Turbo Expo, 2012GT2012-69636 more…
Danner, F.; Kau, H. -P.: Influence of Discretisation on the Prediction of Propeller Noise Generation: Theory and Application. 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2012ISROMAC-2012-1135 more…
Hupfer, A.; Erhard, W.; Kau, H. -P.: Investigation of combustor concepts for micro gas turbine jet engines. 23rd International Symposium on Transport Phenomena, 2012 more…
Höglauer, C.; Kniesner, B.; Knab, O.; Schlieben, G.: Simulation of Liquid and Transcritical Cooling Films in Rocket Combustion Chambers. Space Propulsion, 2012 more…
Hönle, J.; Barth, A.; Erhard, W.; Kau, H. -P.: Engine Quick Start in Case of Emergency - A Requirement for Saving Fuel by Means of Engine Shutdown. 38th European Rotorcraft Forum, 2012 more…
Kainz, M.; Chuiton, F. Le; Kau, H. -P.: Near-Field Noise Reduction of a Ducted Helicopter Tail Rotor due to a Modified Stator Vane Geometry. ASME Turbo Expo, 2012GT2012-69118 more…
Kainz, M.; Chuiton, F. Le; Kau, H. -P.: Aeroacoustic Near-Field Study of a Ducted Helicopter Tail Rotor with Different Vane Count by Use of Phase-Lagged Boundaries. 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2012ISROMAC-2012-1152 more…
Kerler, M.; Hönle, J.; Kau, H. -P.: Modeling of BO 105 Flight Dynamics for Research on Fuel Saving due to Single-Engine Operation. 38th European Rotorcraft Forum, 2012 more…
Kirchberger, C.; Schlieben, G.; Haidn, O. J.: Assessment of Analytical Models for Film Cooling in a Hydrocarbon/ GOX Rocket Combustion Chamber. 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2012 more…
Kirchberger, C.; Schlieben, G.; Hupfer, A.; Kau, H. -P.: Experimental Investigation on Film Cooling in a Hydrocarbon/ GOX Rocket Combustion Chamber. 50th AIAA Aerospace Sciences Meeting and Exhibit, 2012AIAA-2012-0526 more…
Prokopczuk, P.; Pöhler, A.; Hupfer, A.; Zäh, M. F.: Simulation des Schwungrad-Reibschweißprozesses mit ABAQUS. Forschung im Ingenieurwesen 76 (3-4), 2012, 67-76 more…
Rockel, D.; Hupfer, A.; Kau, H. -P.: Generativ gefertigte Teile im Flugzeugbau - Neue Ansätze in der Triebwerkskonstruktion. DIGITAL ENGINEERING (4), 2012, 24-25 more…
Rockel, D.; Hupfer, A.; Kau, H. -P.: New possibilities for blade mistuning through the use of additive manufacturing technologies. 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, 2012 more…
Rockel, D.; Hupfer, A.; Kau, H. -P.: New Possibilities of Aero Engine Design Using Additive Manufacturing Technologies. Fraunhofer Direct Digital Manufacturing Conference, 2012 more…
S.B., Verma; R., Stark; Haidn, O.J.: Effect of Ambient Pressure Fluctuations on Dual-Bell Transition Behavior. 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2012 more…
Schlieben, G.; Kirchberger, C.; Haidn, O. J.: Using Intra Cooling Channel Measurements for Film Cooling Investigations in a GOX/ Kerosene Rocket Combustion Chamber. 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2012 more…
Schlieben, G.; Kirchberger, C.; Kau, H. -P.; Soller, S.; Höglauer, C.: Using Intra Cooling Channel Measurements for Film Cooling Investigations in a GOX/ Kerosene Rocket Combustion Chamber. Space Propulsion, 2012 more…
Streit, J. A.; Fröbel, T.; Veggi, L.; Groth, C.; Kau, H. -P.: Instationäre Strömung im Schaufelrandbereich und in Randkavitäten. 13. Statusseminar der AG Turbo, Wissenschaftliche Koordinierungsstelle AG Turbo - Deutsches Zentrum für Luft-und Raumfahrt e.V. (DLR), 2012 more…
Streit, J. A.; Guinet, C.; Heinichen, F.; Kau, H. -P.: Trading Excessive Stall Margin for Efficiency: An Alternative Approach to Axial-Slot Casing Treatments for Transonic Compressors. 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, 2012 more…
Streit, J. A.; Mayenberger, T.; Joßberger, S.; Kau, H. -P.: Teaching Turbo Compressor Design - from Mean Line to 3D CFD. 29th CADFEM ANSYS SIMULATION CONFERENCE, 2012 more…
Suslov, D.I.; Deeken, J.; O.J., Haidn: Investigation of the API-Injection Concept in a LOX/LH2 Combustion Chamber at GG/PB Operation Conditions. 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2012 more…
V.P., Zhukov; Haidn, O.J.: Analytical Study of Stationary Temperature Field in Transpiration Cooled Porous Wall. Journal of Aerospace Engineering, 2012 more…
Weihard, S.; Hupfer, A.; Wittmer, J.; Kau, H. -P.: Statistische Toleranzeffekte am statorseitigen Axialspaltufer von Turboverdichtern. Deutscher Luft- und Raumfahrtkongress, 2012 more…

2010

Borm, Oliver; Balassa, Balint; Barthmes, Sebastian; Fellerhoff, Julius; Kau, Hans-Peter; others: Demonstration of an aerodynamic design process for turbomachines using open source software tools. ASME Turbo Expo, 2010GT2010-22194 more…
Borm, Oliver; Tekin, Fethi; Kau, Hans-Peter: Implementation of a Domain Scaling Approach for Turbomachinery Computations in OpenFOAM. 5th OpenFOAM Workshop, 2010 more…
Brignole, Giovanni Aldo: Parameter zur Auslegung effizienter Gehäusestrukturierungen. Dissertation, 2010 more…
Froebel, Tobias; Kau, Hans-Peter; Groth, Christian; Gümmer, Volker: Numerical Investigation of Unsteady Flow Phenomena in an HP Axial Flow Compressor Incorporating Stator Shroud Cavities. 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2010 more…
Fuhrmann, S.; Kau, H. -P.: Validation of CFD-Simulations for a Supersonic Combustion Chamber using ANSYS CFX. 28th CADFEM ANSYS SIMULATION CONFERENCE, 2010 more…
Hembera, M.; Danner, F.; Kainz, M.; Kau, H. -P.: High Performance Computing in Science and Engineering - Garching Munich 2009 – Comparing Frequency-Based Flow Solution to Traditional Unsteady Fluid Dynamics Analysis in Turbomachinery. In: Wagner, S.; Steinmetz, M.; Bode, A. (Ed.): Springer Science & Business Media, 2010, 161-174 more…
Hupfer, A.; Spyra, N.; Erhard, W.; Kau, H. -P.; Schmidt, M.; Simon, M.: A new fuel/air premixing system for gas turbines and its influences on the performance and emission characteristics. The 21st International Symposium on Transport Phenomena, 2010 more…
Kainz, Marc; Danner, Florian; Kau, Hans-Peter; Le Chuiton, Fre; others: Numerical investigation into the unsteady aerodynamics of a ducted helicopter tail rotor under side-wind conditions. ASME Turbo Expo, 2010 more…
Schlieben, G.; Höglauer, C.; Kirchberger, C.; Hupfer, A.; Kau, H. P.; Knab, O.: Further Experimental and Analytical Results of Film Cooling Investigations with a GOX Kerosene Combustion Chamber. Jahresbericht des SFB Transregio 40 "Technologische Grundlagen für den Entwurf thermisch und mechanisch hochbelasteter Komponenten zukünftiger Raumtransportsysteme", 2010, more…
Spyra, Nikolaus: Entwicklung und Untersuchung eines neuartigen Brennstoffaufbereitungssystems für kleine Gasturbinen. Dissertation, 2010 more…

2009

Borm, Oliver; Danner, Florian: Numerical Optimization of Compressor Casing Treatments for Influencing the Tip Gap Vortex. In: High Performance Computing in Science and Engineering, Garching/Munich 2007. Springer, 2009, 215--225 more…
Danner, Florian CT; Kau, Hans-Peter; Schiffer, Heinz-Peter; Brignole, Giovanni A; others: Experimental and numerical analysis of axial skewed slot casing treatments for a transonic compressor stage. ASME Turbo Expo, 2009 more…
Denis, S Rocci; Maier, D; Kau, H-P: Experimental investigation on staged injection in a dual-mode combustor. In: Shock Waves. Springer, 2009, 1123--1128 more…
Fuhrmann, Thomas: Auslegung und Betriebsverhalten von SCRamjet-Antriebssystemen für Raumtransporter-Hyperschallflugzeuge. Dissertation, 2009 more…
Hembera, Michael: Numerischer Entwurf von effizienten Casing Treatments für einen 4,5-stufigen Hochdruckverdichter. Dissertation, 2009 more…
Hembera, Michael; Loos, Andreas; Danner, Florian CT; Kau, Hans-Peter; Johann, Erik; others: Validation of the non-linear harmonic approach for quasi-unsteady simulations in turbomachinery. ASME Turbo Expo, 2009 more…
Hembera, Michael; Loos, Andreas; Kau, Hans-Peter; Johann, E: Comparing a 40 Mio gridpoints full-annulus computation with a 7 Mio gridpoints nonlinear harmonic computation. 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, 2009 more…
Kirchberger, Christoph; Hupfer, Andreas; Kau, Hans-Peter; Soller, Sebastian; Martin, Philip; Bouchez, Marc; Dufour, Emmanuel: Improved prediction of heat transfer in a rocket combustor for GOX/kerosene. 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, 2009AIAA-2009-1214 more…
Kirchberger, Christoph; Schlieben, Gregor; Hupfer, Andreas; Kau, Hans-Peter; Soller, Sebastian; Martin, Philip: Investigation on Film Cooling in a Kerosene/GOX Combustion Chamber. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2009 more…
Kirchberger, Christoph; Soller, Sebastian; Kuhn, Markus; Steelant, Johan: Cooling of Ceramic Combustion Chambers. 19th International Society for Air Breathing Engines Conference, 2009ISABE-2009-1159 more…
Kirstein, Sirka; Maier, Dominic; Fuhrmann, Thomas; Hupfer, Andreas; Kau, Hans-Peter: Experimental Study on Staged Injection in a Supersonic Combustor. 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, 2009AIAA-2009-7343 more…
Kuhn, M.; Hald, H.; Ortelt, M.; Kirchberger, C.; Schlieben, G.; Kau, H. -P.: CMC Materials for Combustion Chamber Applications. EUCASS Advances in Aerospace Sciences - Propulsion Physics, 2009 more…
Maier, D; Kirstein, S; Fuhrmann, T; Rocci Denis, S; Hupfer, A; Kau, H-P: Scramjet research activities at the Institute of Flight Propulsion of the Technische Universität München. 6th European Symposium on Aerothermodynamics for Space Vehicles, 2009 more…
Schlieben, G.; Höglauer, C.; Kirchberger, C.; Hupfer, A.; Kau, H. -P.; Knab, O.: First Experimental and Analytical Results of Film Cooling Investigations with a GOX/Kerosene Combustion Chamber. Jahresbericht des SFB Transregio 40 "Technologische Grundlagen für den Entwurf thermisch und mechanisch hochbelasteter Komponenten zukünftiger Raumtransportsysteme", 2009, more…
Soller, Sebastian; Kirchberger, Christoph; Kuhn, Markus; Langener, Tobias; Bouchez, Marc; Steelant, Johan: Experimental investigation of cooling techniques and materials for highspeed flight propulsion systems. 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, 2009AIAA-2009-7374 more…
Stumvoll, Alexander: Methoden statistischer Toleranzanalyse bei der Entwicklung von Turbomaschinen. Dissertation, 2009 more…

2008

Blaim, Franz; Borm, Oliver; Fröbel, Tobias; Kau, H.P.: Implementation of rotor-stator interfaces in OpenFOAM. 3rd OpenFOAM Workshop, 2008 more…
Brignole, Giovanni A; Danner, Florian CT; Kau, Hans-Peter: Time resolved simulation and experimental validation of the flow in axial slot casing treatments for transonic axial compressors. ASME Turbo Expo, 2008 more…
Danner, F.; Brignole, G.; Hembera, M.; Kau, H. -P.: NUMERISCHE AUSLEGUNG VON GEHäUSESTRUKTURIERUNGEN FüR EINE TRANSSONISCHE AXIALVERDICHTERSTUFE. Deutscher Luft- und Raumfahrtkongress, 2008 more…
Fuhrmann, T; Kau, H.P.: 1D und 3D-Simulationen zur Leistungsvorhersage von Scramjet-Antriebssystemen. Deutscher Luft- und Raumfahrtkongress, 2008 more…
Hembera, M; Kau, H-P; Johann, E: Simulation of casing treatments of a transonic compressor stage. International Journal of Rotating Machinery 2008, 2008 more…
Hembera, M; Kau, H-P; Johann, E: Simulation of casing treatments of a transonic compressor stage. International Journal of Rotating Machinery 2008, 2008, 10 more…
Hembera, Michael; Danner, Florian; Kau, Hans-Peter; Brignole, G: Numerical design and optimization of casing treatments for transonic axial compressors. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008AIAA-2008-5063 more…
Hembera, Michael; Kau, Hans-Peter; Danner, F; Butzeck, Christopher; Johann, E: Development of circumferential grooves for axial compressors based on flow mechanisms. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008 more…
Kirchberger, C; Kau, H.P.: Kupfer--Ein Werkstoff fur Raketenbrennkammern. Metall - Internationale Fachzeitschrift für Metallurgie 62 (10), 2008, 646 more…
Kirchberger, Christoph; Schlieben, Gregor; Wagner, Robert; Kau, Hans-Peter; Maeding, Chris; Soller, Sebastian; Martin, Philip: Design and Commissioning of a Combustion Chamber for Cooling and Material Investigations. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008 more…
Kirchberger, Christoph; Wagner, Robert; Kau, Hans-Peter; Soller, Sebastian; Martin, Philip; Bouchez, Marc; Bonzom, Christophe: Prediction and analysis of heat transfer in small rocket chambers. 46th AIAA Aerospace Sciences Meeting and Exhibit, 2008 more…
Maier, D.; Denis, S. Rocci; Kirstein, S.; Hupfer, A.; Kau, H. -P.: Gestufte Verbrennung in einer überschallbrennkammer. Deutscher Luft- und Raumfahrtkongress, 2008DLRK2008-81297 more…
Rocci-Denis, Sara; Maier, Dominic; Kau, Hans-Peter: Staged injection in a dual-mode combustor for an air-breathing engine. 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 2008 more…
Soller, Sebastian Michael: Injektoren für Hauptstromtriebwerke mit oxidatorreicher Vorverbrennung. Dissertation, 2008 more…
Spyra, N.; Hupfer, A.; Erhard, W.; Kau, H. -P.; Schmidt, M.; Simon, M.: UNTERSUCHUNG EINES NEUARTIGEN BRENNSTOFF-AUFBEREITUNGSSYSTEMS FüR GASTURBINEN. Deutscher Luft- und Raumfahrtkongress, 2008 more…
Stumvoll, AK; Wittmer, J; Kau, H.P.: Spoke Centering Eccentricity - Statistical Tolerance Analysis. 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2008ISROMAC12-2008-20025 more…
Stumvoll, Alexander K; Kau, Hans-Peter: Investigation in the Eccentricity of Spoke Centered Turbomachinery Components. ASME Turbo Expo, 2008 more…

2007

Boyce, Russell R.; Stumvoll, Alexander K.: Re-entry body drag: shock tunnel experiments and computational fluid dynamics calculations compared. Shock Waves 16 (6), 2007, 431--443 more…
Gaisbauer, U.; Weigand, B.; others: Aero-Thermodynamical design of a Scramjet for Future Space Transportation Systems: The Graduate School 1095/1 Funded by the" Deutsche Forschungsgemeinschaft"(DFG). ISABE, 2007, more…
Hannemann, K; Ciezki, HK; Haidn, OJ; von Wolfersdorf, J; Denis, S Rocci: German Test Facilities for High Speed Air Breathing Propulsion. 2nd European Conference for Aerospace Sciences, 2007 more…
Hupfer, Andreas: Kraftstoffeinspritzsysteme für Vormischbrenner kleiner Fluggasturbinen. Dissertation, 2007 more…
Rocci-Denis, S; Maier, D; Kau, H.P.: Experimental Investigations on Staged Injection in a Dual Mode Combustor. 26th International Symposium on Shock Waves, Bd, 2007 more…
Soller, Sebastian; Wagner, Robert; Kau, Hans-Peter; Martin, Philip; Maeding, Chris: Combustion stability characteristics of coax-swirl-injectors for oxygen/kerosene. 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2007AIAA-2007-5563 more…
Wagner, R; Soller, S; Kau, HP; Martin, P; Maeding, C: Experimental Investigations of Coax Swirl Injectors for Hydrocarbons. 58th International Astronautical Congress, 2007IAC-07-C4. 3.06, more…
Waldner, Daniel: Optimierung der Spiele und Spalte im Konstruktionsprozess von Flugtriebwerken. Dissertation, 2007 more…

2006

Hupfer, A.; Rott, C.; Kau, H. -P.; Vendier, H.: Experimental Investigations on Lean Premixed Prevaporized Combustors for Small Aeroengines. 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2006Paper No. 61 more…
Kau, H.P.; Brignole, G.; Wilke, I.: Designing a Casing Treatment for a Transonic Axial Compressor. von Karman Institute for Fluid Dynamics, 2006 more…
Soller, S.; Wagner, R.; Kau, H.P.; Martin, P.; Maeding, C.: Experimental Research on Key technologies for Future Launcher Propulsion. 57th International Astronautical Congress, 2006IAC-06-C4.1.05 more…
Soller, S.; Wagner, R.; Kau, H.P.; Martin, P.; Maeding, C.: Influence of Coaxial Injector Element Design on Heat Transfer in Oxidizer Rich Staged Combustion Cycle Engines. 57th International Astronautical Congress, 2006IAC-06-C4.3.05 more…
Wagner, Robert; Soller, Sebastian; Kau, Hans-Peter; Martin, Philip; Maeding, Chris: Influence of Injector Element Design on Heat Transfer. 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2006 more…
Weigand, Bernhard; Gaisbauer, Uwe; Reinartz, Birgit; Kau, HP; Schröder, Wolfgang: Das Graduiertenkolleg 1095/1:" Aerothermodynamische Auslegung eines Scramjet-Antriebssystems für Zukünftige Raumtransportsysteme. Deutscher Luft- und Raumfahrtkongress, 2006DGLR-2006-127 more…

2005

Brignole, G.; Kau, H.P.; Wilke, I.: Numerical evaluation of important parameters ruling the effectiveness of casing treatments in transonic compressors. 17th Symposium on Airbreathing Engines, paper ISABE-2005-1095, Munich, Germany, 2005 more…
Kau, Hans-Peter; Gerber-Braun, Beatrice; Böbel, Eva; Spörrle, Matthias: Using a multi-level tailored design process to develop a customer satisfaction survey for university evaluation. , 2005 more…
Rick, H.; Bauer, A.; Esch, T.; Hollmeier, S.; Kau, H.P.; Kopp, S.; Kreiner, A.: Hypersonic highly integrated propulsion systems--design and off-design simulation. Chapter 5.3. 2. Basic Research and Technologies for Two-Stage-to-Orbit Vehicles. DFG, Wiley-VCH, 2005 more…
Rocci-Denis, Sara; Maier, Dominic; Erhard, Wolfgang; Kau, Hans-Peter: Free Stream Investigations on Methane Combustion in a Supersonic Air Flow. AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technologies Conference, 2005 more…
Soller, Sebastian; Wagner, Robert; Kau, Hans-Peter; Martin, Philip; Maeding, C.: Characterisation of Main Chamber Injectors for GOX/Kerosene in a Single Element Rocket Combustor. 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2005 more…
Soller, Sebastian; Wagner, Robert; Kirchberger, Charles; Kau, Hans-Peter; Martin, Philip; Maeding, C.: Characterisation of combustion and heat transfer using GOx/kerosene in a single-element rocket combustor. 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2005 more…
Wilke, I.; Kau, H.P.; Brignole, G.: Numerically aided design of a high-efficient casing treatment for a transonic compressor. ASME Turbo Expo, 2005 more…
Wilke, Ingo: Verdichterstabilisierung mit passiven Gehäusestrukturen: eine numerische Analyse. Scientific research dissertation, Lehrstuhl für Flugantriebe, Technische Universität München, München, Germany, 2005 more…

2004

Brandstetter, Armin Johann Leopold: Betriebsverhalten einer Dualmodus-SCRamjet-Modellbrennkammer mit Wasserstoffverbrennung. Dissertation, 2004 more…
Wilke, I.; Kau, H.P.: Stall margin enhancing flow mechanisms in a transonic compressor stage with axial casing slots. 10 th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC10-2004-006, Honolulu, 2004 more…

2003

Rocci Denis, S.; Brandstetter, A.; Kau, H.P.: Transition between Ramjet and Scramjet Modes in a Combustor for an Air-Breathing Launcher. AIAC Paper 54, 2003 more…
Rocci Denis, Sara; Brandstetter, Armin; Kau, Hans-Peter: Experimental study on transition between ramjet and scramjet modes in a dual-mode combustor. In: 12th AIAA International Space Planes and Hypersonic Systems and Technologies. , 2003, 7048 more…
Uhlmann, Hans-Günter: Früherkennung aerodynamischer Verdichterinstabilitäten mittels Wavelet-Transformationsregeln. Dissertation, 2003 more…
Wilke, I.; Kau, H.P.: A numerical investigation of the flow mechanisms in a HPC front stage with axial slots. ASME Turbo Expo, 2003 more…
Wilke, I.; Kau, H.P.: A numerical investigation of the flow mechanisms in a HPC front stage with axial slots. ASME Turbo Expo, 2003 more…

2002

Brandstetter, A.: Flame stabilization in supersonic combustion. (AIAA/AAAF 11th Int. Space Planes and Hypersonic Systems and Technol. Conference), 2002, 2002 more…
Brandstetter, A.; Rocci Denis, S.; Kau, H.P.; Rist, D.: Experimental Investigation on Supersonic Combustion with Strut Injection. AIAA 5242, 2002, 2002 more…
Fink, R.; Hupfer, A.; Rist, D.: Non-intrusive measurements of a LPP combustor under elevated pressure conditions. ASME Turbo Expo, 2002 more…
Kreiner, Andreas: Modellbasierte Regelung der Hochleistungstriebwerke von Hyperschallflugzeugen. Dissertation, 2002 more…
Soller, S.; Kau, H.P.; Kretschmer, J.; Martin, P.; Mäding, C.: Untersuchungen zur Verbrennung von Kerosin in Raketentriebwerken. Deutscher Luft- und Raumfahrtkongress, 2002 more…
Wilke, I.; Kau, H.P.: A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage. ASME Turbo Expo, 2002 more…

2001

Becker, Ralf: Auslegung und deterministische Optimierung stark gekühlter Turbinen. Dissertation, 2001 more…
Fink, Rainer: Untersuchungen zu LPP-Flugtriebwerksbrennkammern unter erhöhtem Druck. Dissertation, 2001 more…
Preiß, Armin: Eintrittsstörungen bei Fluggasturbinen unter besonderer Berücksichtigung instationärer Gaszusammensetzungen. Dissertation, 2001 more…
Wilke, I.; Kau, H.P.: Wechselwirkung zwischen Rotorströmung und Casing Treatment. Deutscher Luft- und Raumfahrtkongress, 2001 more…

2000

Fink, R; Hupfer, A; Mazella, R; Rist, D; Kau, HP: Einfluß des Drucks auf die Emissionscharakteristik von LPP-Brennern. Deutscher Luft- und Raumfahrtkongress, 2000 more…
Gümmer, V.; Wenger, U.; Kau, H.P.: Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors. ASME Turbo Expo, 2000 more…
Kopp, Sven: Dynamische Echtzeit-Leistungssyntheserechnung mit Sekundär-und Störeffekten für Hyperschall-Luftstrahlantriebe. Dissertation, 2000 more…
O.C., Rupp: Vorhersage von Instandhaltungskosten bei der Auslegung ziviler Strahltriebwerke. Dissertation, 2000 more…
Preiß, Armin; Kreiner, Andreas; Erhard, Wolfgang: Monitoring of critical inlet air conditions for helicopter gas turbines. 20th Symposium Aircraft Integrated Monitoring Systems, 2000 more…
Rupp, O.C.: Vorhersage von Instandhaltungskosten bei der Auslegung ziviler Strahltriebwerke. Dissertation, 2000 more…
Spiegel, Michael Stefan: Einsatz deterministischer Optimierungsverfahren bei der Vorauslegung hochbelasteter Turbomaschinen. Dissertation, 2000 more…
Wilke, I.; Kau, H.P.: CFD-Simulationen von Verdichterstufen mit Casing Treatment. Deutscher Luft- und Raumfahrtkongress, 2000 more…

1999

Brandstetter, A.: Auslegung und Konstruktion einer Modellbrennkammer zur Untersuchung der Wasserstoffverbrennung in Überschallströmungen. Deutscher Luft- und Raumfahrtkongress, 1999 more…
Erhard, W.; Gabler, R.; Preiss, A.; Rick, H.: Monitoring and control of helicopter engines at abnormal operating conditions. RTO Meeting proceedings, 1999 more…
Spiegel, M.; Becker, R.; Rist, D.; Hermeler, J.: Deterministic optimisation of multiple-stage high-performance turbine-comparative results obtained from parameter and optimisation studies. Deterministische Optimierung einer mehrstufigen Hochleistungsturbine-Vergleichsergebnisse aus Parameter-und Optimierungsstudien. , 1999 more…
Steidle, Boris: Zur Modellierung von Drallflammen einschließlich der NO x-Formation in Flugtriebwerksbrennkammern. Dissertation, 1999 more…

1998

Gabler, Rolf: Betriebsverhalten von Wellenleistungsgasturbinen bei Verdichterinstabilitäten und Methoden zur Restabilisierung. Dissertation, 1998 more…
Hollmeier, S; Kopp, S; Hermann, O; Rick, H: Propulsion/aircraft integration of hypersonic vehicles enabling active thrust vectoring and realtime simulation of dynamic engine bevaviour. Int. J. Turbo Jet Engines, 1998 more…
Kau, H.P.: Compressor matching and designing for tip clearance. NASA (19980219359), 1998 more…
Kau, H.P.: The multidisciplinary design process. RTO LECTURE SERIES, 1998, 1--1 more…
Kau, H.P.; Rist, D.: Teillastverhalten einer Überschall" brennkammer mit Wasserstoffverbrennung in Über- und Hyperschallantrieben. Teilprojekt B12, Sonderforschungsbereich 255, 1998 more…
Lachner, Rudolf: Laserspektroskopische Untersuchungen im Primärteil einer Flugtriebwerks-Brennkammer. Dissertation, 1998 more…
Rick, H.; Esch, T.; others: Leistungsberechnung und Betriebsverhaltensanalyse luftatmender Antriebssysteme für Hyperschallflugzeuge im Normalbetrieb und bei Störungen. Arbeits--und Ergebnisbericht, Sonderforschungsbereich 255, Teilprojekt B1, 1998, 233--296 more…

1997

Brehm, N.; Kau, H.P.; Jones, S.P.: The BR 710, an environmentally friendly engine. CASI-Annual Conference, 1997 more…
Esch, Thomas: Zur Integration des Antriebes in ein Hyperschallflugzeug unter besonderer Berücksichtigung der Kräftebilanzierung. Dissertation, 1997 more…
Fink, R; Lachner, R; Theisen, D; Steidle, B; Rist, D: Mischung und Verbrennung in schadstoffarmen Brennkammern-Untersuchungen an Brennkammern mit Stufung sowie mit Vorvermischung/Vorverdampfung. Deutscher Luft- und Raumfahrtkongress, 1997 more…
Hollmeier, S.; Kopp, S.; Fiola, R.; Rick, H.: Simulationsmodelle zur Regelung von Antriebssystemen für Hochgeschwindigkeitsflugzeuge. 3. Hyperschall-Workshop SFB, 1997 more…
Hollmeier, Sebastian: Simulation des Betriebsverhaltens von Antrieben für Raumtransporter, Hyperschallflugzeuge. Dissertation, 1997 more…
Honig, R.; Theisen, D.; Fink, R.; Kappler, G.; Rist, D.; Andresen, P.: DIAGNOSTICS OF NON-REACTING AND REACTING SUPERSONIC FLOWS IN A SCRAMJET MODEL COMBUSTOR USING NON-INTRUSIVE SPECTROSCOPIC METHODS. International Journal of Energetic Materials and Chemical Propulsion 4 (1-6), 1997 more…
Lee, Kuo-Lung: Zur Modellierung des Schadstoff-Emissionsverhaltens von Fluggasturbinen. Dissertation, 1997 more…
Rick, H.: Neue Technologie für Hubschrauber-Anforderungen an zukünftige Hubschrauberantriebe. , 1997 more…

1996

Auer, Egon J.: Modellbildung, Simulation und Entwicklung eines digitalen Reglers für eine Hubschraubergasturbine. Dissertation, 1996 more…
Esch, T.; Hollmeier, S.; Rick, H.: Design and off-design simulation of highly integrated hypersonic propulsion systems. Technische Univ, Advanced Aero-Engine Concepts and Controls p(SEE N 96- 36571 12-07), 1996 more…
Hönig, R.; Theisen, D.; Fink, R.; Lachner, R.; Kappler, G.; Rist, D.; Andresen, P.: Experimental investigation of a SCRAMJET model combustor with injection through a swept ramp using laser-induced fluorescence with tunable excimer lasers. Symposium (International) on Combustion, 1996 more…
Lachner, Rudolf; Theisen, Daniel; Kettl, Hans; Fink, Rainer; Rist, Dieter; Schmid, Achim; Hönig, Rainer; Kappler, Günter: Detection of Unburned Hydrocarbons (UHC) in an Atmospheric Pressure Combustor With Premixing and Prevaporization Using a Tuneable Excimer Laser. ASME Turbo Expo, 1996V001T02A012 more…

1995

Esch, T.; Bauer, A.; Rick, H.: Simulation and nozzle/afterbody integration of hypersonic propulsion systems. Zeitschrift für Flugwissenschaften und Weltraumforschung 19 (1), 1995, 19--28 more…
Gabler, R.; Auer, E.; Erhard, W.; Rick, H.: Turboshaft Engine Monitoring System including Contingency Operation. 5th European Propulsion Forum, Pisa, 1995 more…
Hollmeier, S.; Esch, T.; Rick, H.; Herrmann, O.: Propulsion/aircraft integration and dynamic performance of hypersonic TSTO-vehicles. 12th International Symposium on Air Breathing Engines, 1995 more…
Hollmeier, S.; Rick, H.; Wagner, O.: Zur Echtzeitsimulation von Hyperschallkombinationstriebwerken im Flugsimulator. Deutscher Luft- und Raumfahrtkongress, 1995 more…
Lachner, R.; Hoenig, R.; HOSSFELD, H.C.; Magrini, G.L.; Kappler, G.: One-dimensional model of the chemically reacting flow in a supersonic combustion chamber. Zeitschrift für Flugwissenschaften und Weltraumforschung 19 (1), 1995, 34--40 more…
Siden, G.; Kau, H.P.: Thermodynamische Auslegung der Niederdruckturbinen der BR700 Triebwerksfamilie. Deutscher Luft- und Raumfahrtkongress, 1995 more…