Skip to content
Technical University of Munich

2024

  • Teltschik, Jan; Matter, Julius; Woebbeking, Sven; Jahn, Kristina; Borja Adasme, Yara; Van Paepegem, Wim; Drechsler, Klaus; Tallawi, Marwa: Review on recycling of carbon fibre reinforced thermoplastics with a focus on polyetheretherketone. Composites Part A: Applied Science and Manufacturing 184 (Volume 184), 2024, 108236 more…

2022

  • Bublitz, D.; Colin, D.; Drechsler, K.: Implementation of a viscoelastic material model to predict the compaction response of dry carbon fiber preforms. Composites Part A: Applied Science and Manufacturing 153, 2022, 106718 more…

2021

  • Consul, P.; Beuerlein, K.-U.; Luzha, G.; Drechsler, K.: Effect of Extrusion Parameters on Short Fiber Alignment in Fused Filament Fabrication. Polymers 13 (15), 2021, 2443 more…
  • Mayer, S.; Tallawi, M.; De Luca, I.; Calarco, A.; Reinhardt, N.; Avila Gray, L.; Drechsler, K.; Moeini, A.; Germann, N.: Antimicrobial and physicochemical characterization of 2,3-dialdehyde cellulose-based wound dressings systems. Carbohydrate Polymers 272, 2021, 118506 more…
  • Tagscherer, N.; Consul, P.; Kottenstedde, I.L.; Latiri, H.; Zaremba, S.; Drechsler, K.: Investigation of nonisothermal fusion bonding for extrusion additive manufacturing of large structural parts. Polymer Composites 42 (10), 2021, 5209-5222 more…
  • Vollmer, M.; Zaremba, S.; Mertiny, P.; Drechsler, K.: Edge Race-Tracking during Film-Sealed Compression Resin Transfer Molding. Journal of Composites Science 5 (8), 2021, 195 more…
  • Öztas, K.A.; Kunze, K.; Jois, K.; Sackmann, J.; Zaremba, S.; Ruf, M.G.: A numerical approach to design a type II box-shaped pressure vessel with inner tension struts. International Journal of Hydrogen Energy, 2021 more…

2020

  • Colin, D.; Bel, S.; Hans, T.; Hartmann, M.; Drechsler, K.: Virtual Description of Non-Crimp Fabrics at the Scale of Filaments Including Orientation Variability in the Fibrous Layers. Applied Composite Materials 27 (4), 2020, 337-355 more…
  • Consul, P.; Chaplin, A.; Tagscherer, N.; Zaremba, S.; Drechsler, K.: Interlaminar strength in large‐scale additive manufacturing of slow crystallizing polyaryletherketone carbon composites. Polymer International, 2020 more…
  • Eschler, E.; Miadowitz, T.; Zaremba, S.; Drechsler, K.: Design Optimization of a Braided Roof Frame Reinforcement by Process-Integrated Local Customization of Component Properties. Applied Composite Materials 27 (1-2), 2020, 75-91 more…
  • Heller, K.; Hallmannseder, M.; Colin, D.; Kind, K.; Drechsler, K.: Comparing Test Methods for the Intra-ply Shear Properties of Uncured Prepreg Tapes. Science and Engineering of Composite Materials 27 (1), 2020, 89-96 more…
  • Maidl, S.; Fernández Villalba, Á.; Kind, K.; Drechsler, K.: Development of sensor integrated braiding rings for the automated detection of braiding defects. Materials Today: Proceedings, 2020 more…

2019

  • Chen, H.; Wang, J.; Ni, A.; Ding, A.; Li, S.; Han, X.: Effect of nano-OMMTs on mode I and mode II fracture toughness of continuous glass fibre reinforced polypropylene composites. Composite Structures 208, 2019, 498-506 more…
  • Chen, J.; Wang, J.; Ding, A.; Ni, A.; Chen, H.: Flame retardancy and mechanical properties of glass fibre reinforced polyethylene composites filled with novel intumescent flame retardant. Composites Part B: Engineering 179, 2019, 107555 more…
  • Ding, A.; Wang, J.; Ni, A.; Li, S.: A new analytical solution for cure-induced spring-in of L-shaped composite parts. Composites Science and Technology 171, 2019, 1-12 more…
  • Ding, A.; Wang, J.; Ni, A.; Li, S.: Assessment on the ageing of sandwich composites with vinylester-based composite faces and PVC foam core in various harsh environments. Composite Structures 213, 2019, 71-81 more…
  • Engelhardt, R.; Ehard, S.; Wolf, T.; Oelhafen, J.; Kollmannsberger, A.; Drechsler, K.: In Situ Joining of Unidirectional Tapes on Long Fiber Reinforced Thermoplastic Structures by Thermoplastic Automated Fiber Placement for Scientific Sounding Rocket Applications. Procedia CIRP 85, 2019, 189-194 more…
  • Engelhardt, R.; Irmanputra, R.; Brath, K.; Aufenanger, N.; Drechsler, K.: Thermoset Prepreg Compaction during Automated Fiber Placement and Vacuum Debulking. Procedia CIRP 85, 2019, 153-158 more…
  • Joosten, M.W.; Hirth, C.; Thomson, R.; Körber, H.: Effect of environmental conditions on the failure mechanisms and energy absorption of open-section crush elements under quasi-static loading. Composite Structures 209, 2019, 747-753 more…
  • Krollmann, J.; Schreyer, T.; Veidt, M.; Drechsler, K.: Impact and post-impact properties of hybrid-matrix laminates based on carbon fiber-reinforced epoxy and elastomer subjected to low-velocity impacts. Composite Structures 208, 2019, 535-545 more…
  • May, D.; Aktas, A.; Advani, S.G.; Berg, D.C.; Endruweit, A.; Fauster, E.; Lomov, S.V.; Long, A.; Mitschang, P.; Abaimov, S.; Abliz, D.; Akhatov, I.; Ali, M.A.; Allen, T.D.; Bickerton, S.; Bodaghi, M.; Caglar, B.; Caglar, H.; Chiminelli, A.; Correia, N.; Cosson, B.; Danzi, M.; Dittmann, J.; Ermanni, P.; Francucci, G.; George, A.; Grishaev, V.; Hancioglu, M.; Kabachi, M.A.; Kind, K.; Deléglise-Lagardère, M.; Laspalas, M.; Lebedev, O.V.; Lizaranzu, M.; Liotier, P.-J.; Middendorf, P.; Morán, J.; Park, C.-H.; Pipes, R.B.; Pucci, M.F.; Raynal, J.; Rodriguez, E.S.; Schledjewski, R.; Schubnel, R.; Sharp, N.; Sims, G.; Sozer, E.M.; Sousa, P.; Thomas, J.; Umer, R. et al.: In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise. Composites Part A: Applied Science and Manufacturing 121, 2019, 100-114 more…
  • Oblinger, C.; Baeten, A.; Drechsler, K.: Experimental Characterization of the Fiber Angles of Multiple Curved Laminate Segments Using Prepreg-Based Carbon Fiber Reinforced Polymers as a Structure for a Non-Engaging Bellows Coupling. Key Engineering Materials 809, 2019, 555-562 more…
  • Regner, S.; Drechsler, K.; Sentpali, S.: Modification of the fiber/matrix bonding by a plasma treatment to reduce the structure-borne sound transmission. Applied Acoustics 153, 2019, 78-86 more…
  • Stokes-Griffin, C.M.; Kollmannsberger, A.; Compston, P.; Drechsler, K.: The effect of processing temperature on wedge peel strength of CF/PA 6 laminates manufactured in a laser tape placement process. Composites Part A: Applied Science and Manufacturing 121, 2019, 84-91 more…

2018

  • Bruckbauer, P.; Beier, U.; Drechsler, K.: Polyetherimid-Epoxidharz Interphasen zur Anbindung von Funktionsschichten auf Faserverbundwerkstoffen. Journal of Plastics Technology 14, 2018 more…
  • Kammerhofer P.; Zaremba S.; Drechsler K.: Untersuchungen zur Haltbarkeit von Formen aus carbonfaserverstärkten Kunststfoffen (CFK): Ein Vergleich der Matrixsysteme Epoxid und BMI. Journal of Plastics Technology 14, 2018 more…
  • Kuhn, P.; Catalanotti, G.; Xavier, J.; Plöckl, M.; Körber, H.: Determination of the crack resistance curve for intralaminar fiber tensile failure mode in polymer composites under high rate loading. Composite Structures 204, 2018, 276-287 more…
  • Körber, H.; Kuhn, P.; Plöckl, M.; Otero, F.; Gerbaud, P.-W.; Rolfes, R.; Camanho, P.P.: Experimental characterization and constitutive modeling of the non-linear stress–strain behavior of unidirectional carbon–epoxy under high strain rate loading. Advanced Modeling and Simulation in Engineering Sciences 5 (1), 2018 more…
  • Maidl, S; Sabieraj, M; Mierzwa, A; Ebel, C; Drechsler, K.: Investigating the unwinding behavior of technical yarns and development of a new sensor system for the braiding process. IOP Conference Series: Materials Science and Engineering 406, 2018 more…
  • Mierzwa, A.; Ebel, C.; Drechsler, K.: Auswirkungen lokaler Garnlücken auf die mechanischen Eigenschaften geflochtener Kohlenstofffaser-Kunststoff-Verbunde. Journal of Plastics Technology 14, 2018 more…
  • Schug, A.; Rinker, D.; Hinterhölzl, R.; Drechsler, K.: Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation. International Journal of Material Forming, 2018 more…
  • Stokes-Griffin, C.M.; Kollmannsberger, A.; Ehard, S.; Compston, P.; Drechsler, K.: Manufacture of steel–CF/PA6 hybrids in a laser tape placement process: Effect of first-ply placement rate on thermal history and lap shear strength. Composites Part A: Applied Science and Manufacturing 111, 2018, 42-53 more…
  • Teufl, D.; Zaremba, S.: 2.45 GHz Microwave Processing and Its Influence on Glass Fiber Reinforced Plastics. Materials 11 (5), 2018, 838 more…
  • Wettemann,T.; Henne, F.; Schneiderbauer, G.; Pinto, R.; Drechsler, K.; Ladstätter, E.; Tejerina Hernanz, R.: AFP in-situ consolidation processing. SAMPE Journal (54), 2018, 26-36 more…

2017

  • Eberl, L.; Avila Gray, L.; Zaremba, S.; Drechsler, K.: The effect of fiber undulation on the strain field for pinned composite/titanium joints under tension. Composites Part A: Applied Science and Manufacturing 103, 2017, 148-160 more…
  • Horn, B.; Neumayer, J.; Drechsler, K.: Influence of patch length and thickness on strength and stiffness of patched laminates. Journal of Composite Materials, 2017 more…
  • Jürgens, M.; Heimbs, S.; Lang, H.; Ladstätter, E.; Hombergsmeier, E.: Pull-out testing of multiscale structured metallic z-reinforcements for CFRP laminates. Composite Structures 161, 2017, 384-392 more…
  • Kollmannsberger, A.; Lichtinger, R.; Hohenester, F.; Ebel, C.; Drechsler, K.: Numerical analysis of the temperature profile during the laser-assisted automated fiber placement of CFRP tapes with thermoplastic matrix. Journal of Thermoplastic Composite Materials, 2017 more…
  • Kuhn, P.; Catalanotti, G.; Xavier, J.; Camanho, P.P.; Körber, H.: Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading. Composite Structures 182, 2017, 164-175 more…
  • Manis, F.; Schmieg, M.; Sauer, M.; Drechsler, K.: Properties of Second Life Carbon Fibre Reinforced Polymers. Key Engineering Materials 742, 2017, 562-567 more…
  • Oblinger, C; Baeten, A.; Drechsler, K.: Numerical Analysis on the Structural Behavior of a Non-Engaging CFRP Bellows Coupling for Propulsion Technology. Key Engineering Materials 742, 2017, 723-731 more…
  • Oelhafen, J.; Mayr, T.; Dorner, F.; Moutzouris, K.; Roths, J.; Drechsler, K.: Fiber optic measurement system for Fresnel reflection sensing: Calibration, uncertainty and exemplary application in temperature-modulated isothermal polymer curing. Journal of Lightwave Technology, 2017, 1-1 more…
  • Plöckl, M.; Kuhn, P.; Grosser, J.; Wolfahrt, M.; Körber, H.: A dynamic test methodology for analyzing the strain-rate effect on the longitudinal compressive behavior of fiber-reinforced composites. Composite Structures 180, 2017, 429-438 more…
  • Radlmaier, V.; Heckel, C.; Winnacker, M.; Erber, A.; Körber, H.: Effects of thermal cycling on polyamides during processing. Thermochimica Acta 648, 2017, 44-51 more…
  • Schäfer, M.K.; Raffelt, W.; Zaremba, S.; Drechsler, K.: Ultrasonic mixing head for liquid composite molding: Process and material characteristics. Polymer Composites, 2017 more…
  • Schäfer, P.M.; Guglhoer, T.; Sause, M.G.R.; Drechsler, K.: Development of intimate contact during processing of carbon fiber reinforced Polyamide-6 tapes. Journal of Reinforced Plastics and Composites, 2017, 1 - 15 more…
  • Schäfer, P.M.; Gierszewski, D.; Kollmannsberger, A.; Zaremba, S.; Drechsler, K.: Analysis and improved process response prediction of laser- assisted automated tape placement with PA-6/carbon tapes using Design of Experiments and numerical simulations. Composites Part A: Applied Science and Manufacturing 96, 2017, 137-146 more…
  • Stokes-Griffin, C.M.; Ehard, S.; Kollmannsberger, A.; Compston, P.; Drechsler, K.: A laser tape placement process for selective reinforcement of steel with CF/PA6 composites: Effects of surface preparation and laser angle. Materials & Design 116, 2017, 545-553 more…
  • Swery, E.E.; Hans, T.; Bultez, M.; Wijaya, W.; Kelly, P.; Hinterhölzl, R.; Bickerton, S.: Complete simulation process chain for the manufacturing of braided composite parts. Composites Part A: Applied Science and Manufacturing 102, 2017, 378-390 more…
  • Taubert, R.; Mandel, U.; Hartmann, M.: Influence of nonlinear material behavior on the effect of inter-fiber cracks in composite laminates. Journal of Composite Materials 51 (27), 2017, 3819-3833 more…
  • Weiland, J.; Hubert, P.; Hinterhölzl, R.: Thermal dimensioning of manufacturing moulds with multiple resistively heated zones for composite processing. Journal of Composite Materials, 2017 more…
  • Wölling, J.; Schmieg, M.; Manis, F.; Drechsler, K.: Nonwovens from Recycled Carbon Fibres – Comparison of Processing Technologies. Procedia CIRP 66, 2017, 271-276 more…

2016

  • Buchmann, C.; Langer, S.; Filsinger, J.; Drechsler, K.: Analysis of the removal of peel ply from CFRP surfaces. Composites Part B: Engineering 89, 2016, 352-361 more…
  • Buchmann, C.; Filsinger, J.; Ladstätter, E.: Investigation of Electrical Time Domain Reflectometry for infusion and cure monitoring in combination with electrically conductive fibers and tooling materials. Composites Part B: Engineering 94, 2016, 389-398 more…
  • Cichosz, J.; Wehrkamp-Richter, T.; Körber, H.; Hinterhölzl, R.; Camanho, P.P.: Failure and damage characterization of (±30 ) biaxial braided composites under multiaxial stress states. Composites Part A: Applied Science and Manufacturing (90), 2016, 748-759 more…
  • Ebel, C.; Mierzwa, A.; Kind, K.: Yarn damage during braiding of reinforcement fibers for composites. In: Advances in Braiding Technology. Elsevier BV, 2016 more…
  • Eisenhauer, C.M.; Drechsler, K.: Integration of excess material into a semi-finished product to form complex composite parts. Textile Research Journal, 2016 more…
  • Helmus, R.; Kratz, J.; Potter, K.; Hubert, P.; Hinterhölzl, R.: An experimental technique to characterize interply void formation in unidirectional prepregs. Journal of Composite Materials, 2016 more…
  • Körner, S.; Ladstätter, E.; Drechsler, K.: Accelerating product launches of high-volume applications with data mining. International Journal of Automotive Composites 2 (3/4), 2016, 189 more…
  • Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Hinterhölzl, R.; Drechsler, K.: Investigation on the structural behavior of a metallically 3D-reinforced CFRP/CFRP joint using a variable search based on finite element analyzes. Composite Structures 139, 2016, 199-209 more…
  • Leutz, D.; Vermilyea, M.; Bel, S.; Hinterhölzl, R.: Forming Simulation of Thick AFP Laminates and Comparison with Live CT Imaging. Appl Compos Mater, 2016 more…
  • Mandel, U.; Taubert, R.; Hinterhölzl, R.: Laminate damage model for composite structures. Composite Structures 136, 2016, 441-449 more…
  • Mandel, U.; Taubert, R.; Hinterhölzl, R.: Three-dimensional nonlinear constitutive model for composites. Composite Structures 142, 2016, 78-86 more…
  • Margossian, A.; Bel, S.; Hinterhölzl, R.: On the characterisation of transverse tensile properties of molten unidirectional thermoplastic composite tapes for thermoforming simulations. Composites Part A: Applied Science and Manufacturing 88, 2016, 48-58 more…
  • Mayer, N.; Prowe, J.; Havar, T.; Hinterhölzl, R.; Drechsler, K.: Structural analysis of composite components considering manufacturing effect. Composite Structures 140, 2016, 776-782 more…
  • Mayer, N.; Van Den Broucke, B.; Prowe, J.; Havar, T.; Hinterhölzl, R.: Finite element mapping for incompatible FE meshes of composite structures. Advances in Engineering Software 99, 2016, 81-88 more…
  • Meier, R.; Kahraman, I.; Seyhan, A.T.; Zaremba, S.; Drechsler, K.: Evaluating vibration assisted vacuum infusion processing of hexagonal boron nitride sheet modified carbon fabric/epoxy composites in terms of interlaminar shear strength and void content. Composites Science and Technology 128, 2016, 94-103 more…
  • Neumayer, J.; Körber, H.; Hinterhölzl, R.: An explicit cohesive element combining cohesive failure of the adhesive and delamination failure in composite bonded joints. Composite Structures 146, 2016, 75-83 more…
  • Stefanziosa, C.; Ladstätter, E.,Drechsler, K.: Krafteinleitungselement zur Funktionalisierung von thermoplastischen Faserverbundbauteilen. Journal of Plastics Technology 05, 2016 more…
  • Straumit, I.; Hahn, C.; Winterstein, E.; Plank, B.; Lomov, S.V.; Wevers, M.: Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images. Composites Part A: Applied Science and Manufacturing 81, 2016, 289-295 more…
  • Treffler, R.; Dick, T.; Ladstätter, E.; Fröschl, J.: Einsatz wirrfaserverstärkter Duroplaste in thermomechanisch belasteten Strukturbauteilen im Fahrzeugbau. Materials Testing 58 (7-8), 2016, 644-651 more…

2015

  • Altmann, A.; Gesell, P.; Drechsler, K.: Strength prediction of ply waviness in composite materials considering matrix dominated effects. Composite Structures 127, 2015, 51-59 more…
  • Altmann, A.; Taubert, R.; Mandel, U.; Hinterhölzl, R.; Drechsler, K.: A continuum damage model to predict the influence of ply waviness on stiffness and strength in ultra-thick unidirectional Fiber-reinforced Plastics. Journal of Composite Materials, 2015 more…
  • Arnold, M.; Henne, M.; Bender, K.; Drechsler, K.: Polyamide 12 modified with nanoparticles: Effect on impact behaviour and on the electrical conductivity of carbon fibre-reinforced epoxy composites. Journal of Composite Materials, 2015 more…
  • Fischer, B.; Horn, B.; Bartelt, C.; Blößl, Y.: Method for an Automated Optimization of Fiber Patch Placement Layup Designs. International Journal of Composite Materials Vol. 5 (No. 2), 2015, pp. 37-46 more…
  • Hans, T.; Cichosz, J.; Brand, M.; Hinterhölzl, R.: Finite element simulation of the braiding process for arbitrary mandrel shapes. Composites Part A: Applied Science and Manufacturing, 2015 more…
  • Helmus, R.; Centea, T.; Hubert, P.; Hinterhölzl, R.: Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling. Journal of Composite Materials, 2015 more…
  • Helmus, R.; Hinterhölzl, R.; Hubert, P.: A Stochastic Approach to Model Material Variation Determining Tow Impregnation in Out-of-Autoclave Prepreg Consolidation. Composites Part A: Applied Science and Manufacturing, 2015 more…
  • Kourkoutsaki, T.; Comas-Cardona, S.; Binetruy, C.; Upadhyay, R.K.; Hinterhölzl, R.: The impact of air evacuation on the impregnation time of Out-of-Autoclave prepregs. Composites Part A: Applied Science and Manufacturing 79, 2015, 30-42 more…
  • Körber, H.; Xavier, J.; Camanho, P.P.; Essa, Y.E.; Martín de la Escalera, F.: High strain rate behaviour of 5-harness-satin weave fabric carbon-epoxy composite under compression and combined compression-shear loading. International Journal of Solids and Structures, 2015 more…
  • Lichtinger, R.; Hörmann, P.; Stelzl, D.; Hinterhölzl, R.: The effects of heat input on adjacent paths during automated fibre placement. Composites Part A: Applied Science and Manufacturing, 2015 more…
  • Mandel, U.; Taubert, R.; Hinterhölzl, R.: Mechanism based nonlinear constitutive model for composite laminates subjected to large deformations. Composite Structures 132, 2015, 98-108 more…
  • Margossian, A.; Bel, S.; Hinterhölzl, R.: Bending characterisation of a molten unidirectional carbon fibre reinforced thermoplastic composite using a Dynamic Mechanical Analysis system. Composites Part A: Applied Science and Manufacturing 77, 2015, 154-163 more…
  • Neumayer, J.; Kuhn, P.; Körber, H.; Hinterhölzl, R.: Experimental Determination of the Tensile and Shear Behaviour of Adhesives Under Impact Loading. The Journal of Adhesion, 2015 more…
  • Oblinger, C.; Lang, H.; Drechsler, K.: CFK/Metall-Mischbauweisen im Maschinen und Anlagenbau - wichtiger denn je. Umwelt-Technologie und Energie in Bayern, 2015, 26-28 more…
  • Radlmaier, V.; Ehard, S.; Ladstätter, E.; Drechsler, K.: Thermoplastic Automated Fiber Placement - Current Fields of Application and Future Prospects. JEC Composites Magazine (97), 2015, pp. 39-45 more…
  • Swery, E.E.; Meier, R.; Lomov, S.V.; Drechsler, K.; Kelly, P.: Predicting permeability based on flow simulations and textile modelling techniques: Comparison with experimental values and verification of FlowTex solver using Ansys CFX. Journal of Composite Materials, 2015 more…
  • Taubert, R.; Mandel, U.; Hinterhölzl, R.: Study of layup influences on the nonlinear behavior of composites by evaluation of ply stiffness reduction. Composites Part A: Applied Science and Manufacturing 79, 2015, 63-73 more…
  • Teufl, D.; Ladstätter, E.; Drechsler, K.: Reduction of cure cycle time through microwave curing: a vision for the near future. JEC Composites Magazine (100), 2015, 10-12 more…
  • Weiland, J.; Hartmann, M.; Hinterhölzl, R.: Cure simulation with resistively in-situ heated CFRP molds: implementation and validation. Composites Part A: Applied Science and Manufacturing, 2015 more…

2014

  • Arnold, M.; Henne, M.; Bender, K.; Drechsler, K.: The influence of various kinds of PA12 interlayer on the interlaminar toughness of carbon fiber-reinforced epoxy composites. Polym. Compos., 2014, n/a-n/a more…
  • Harbers, T.; Ebel, C.; Drechsler, K.; Endres, A.; Müller, G.: Highly efficient production and characterization of CFRP made from recycled carbon fibers. SAMPE Journal 50 (3), 2014, pp. 7-13 more…
  • Hine, P.J.; Bonner, M.; Ward, I.M.; Swolfs, Y.; Verpoest, I.; Mierzwa, A.: Hybrid carbon fibre/nylon 12 single polymer composites. Composites Part A: Applied Science and Manufacturing 65, 2014, 19-26 more…
  • Hörmann, P.; Stelzl, D.; Lichtinger, R.; Van Nieuwenhove, S.; Mazón Carro, G.; Drechsler, K.: On the numerical prediction of radiative heat transfer for thermoset automated fiber placement. Composites Part A: Applied Science and Manufacturing 67, 2014, 282-288 more…
  • Margossian, A.; Bel, S.; Balvers, J.M.; Leutz, D.; Freitas, R.; Hinterhölzl, R.: Finite element forming simulation of locally stitched non-crimp fabrics. Composites Part A: Applied Science and Manufacturing 61, 2014, 152-162 more…
  • Meier, R.; Walbran, A.; Hahn, C.; Zaremba, S.; Drechsler, K.: Methods to determine the permeability of textile reinforcements. Journal of Plastics Technology, 2014 more…
  • Raffelt, W.; Häffelin, D.; Drechsler, K.: Geringerer Druck im RTM-Prozess - Glasvliese verbessern die Tränkungseigenschaften bei der CFK-Verarbeitung. Kunststoffe (09), 2014, 156 - 159 more…
  • Thomason, J.L.; Yang, L.; Meier, R.: The properties of glass fibres after conditioning at composite recycling temperatures. Composites Part A: Applied Science and Manufacturing 61, 2014, 201-208 more…
  • Vernet, N.; Ruiz, E.; Advani, S.; Alms, J.B.; Aubert, M.; Barburski, M.; Barari, B.; Beraud, J.M.; Berg, D.C.; Correia, N.; Danzi, M.; Delavière, T.; Dickert, M.; Di Fratta, C.; Endruweit, A.; Ermanni, P.; Francucci, G.; Garcia, J.A.; George, A.; Hahn, C.; Klunker, F.; Lomov, S.V.; Long, A.; Louis, B.; Maldonado, J.; Meier, R.; Michaud, V.; Perrin, H.; Pillai, K.; Rodriguez, E.; Trochu, F.; Verheyden, S.; Wietgrefe, M.; Xiong, W.; Zaremba, S.; Ziegmann, G.: Experimental determination of the permeability of engineering textiles: Benchmark II. Composites Part A: Applied Science and Manufacturing 61, 2014, 172-184 more…

2013

  • Dieringa, H.; Drechsler, K.; Evertz, T; Flaxa, V.; Furrer, P.; Gadow, R.; Georgeou, Z.; Gronebaum, R.H.; Kainer, K.U.; Kwiaton, N.; Lesch, C.; Leyens, C.; Müller, A.; Otto, M.; Peters, M.; Schöttler, J.; Schulz, T.; Springub, B.; Ziegmann, G.: Die Leichtbauwerkstoffe für den Fahrzeugbau. In: Leichtbau in der Fahrzeugtechnik. Springer Nature, 2013 more…
  • Dix, M.; Beck, S.; Repper, A.; Hinterhölzl, R.: Integrierte Materialmodellierung für die CFK-Prozesssimulation. Lightweight Des, 2013, 24-29 more…
  • Haugk, B.; Körber, C.; Drechsler, K.: Fibre reinforced plastics (FRPs) in machine tool building: Identification of potential applications. Journal of Plastics Technology 2013 (01), 2013, 1-20 more…
  • Heim, D.; Hartmann, M.; Neumayer, J.; Klotz, C.; Ahmet-Tsaous, Ö.; Zaremba, S.; Drechsler, K.: Novel method for determination of critical fiber length in short fiber carbon/carbon composites by double lap joint. Composites Part B: Engineering 54, 2013, 365-370 more…
  • Lichtinger, R.; Lacalle, J.; Hinterhölzl, R.; Beier, U.; Drechsler, K.: Simulation and experimental validation of gaps and bridging in the Automated Fiber Placement process. Science and Engineering of Composite Materials, 2013, 1-18 more…
  • Lomov, S.V.; Verpoest, I.; Cichosz, J.; Hahn, C.; Ivanov, D.S.; Verleye, B.: Meso-level textile composites simulations: Open data exchange and scripting. Journal of Composite Materials 48, 2013, 621-637 more…
  • Michl, F.; Coquel, M.: Fully-automated production of complex CFRP parts using Fibre-Patch-Preforming technology. JEC Composites Magazine (87), 2013 more…

2012

  • Rauh, A.; Hinterhölzl, R.; Drechsler, K.: Application of the time-temperature superposition principle to the mechanical characterization of elastomeric adhesives for crash simulation purposes. Eur. Phys. J. Spec. Top. 206, 2012, 15-24 more…
To top