2020
- Big Area Additive Manufacturing of a Thermoplastic Tooling for a Large Thermoset Composite Structure. SAMPE Europe Conference 2020, 2020 more…
- Post Flight Analysis of an In Situ Consolidated Thermoplastic Rocket Module with Integrated Fiber Optic Temperature Sensors. 5th International Conference and Exhibition on Thermoplastic Composites (ITHEC), 2020 more…
- Modeling thermal behaviour of cooling channels in big area additive manufactured structures. SAMPE Europe Conference 2020, 2020 more…
- A Post Lay-up Tack Peel Test for Aerospace Grade Prepreg Tapes. SAMPE Europe Conference 2020, 2020 more…
- Optimization of the Determination of Kamal’s Parameters in SMC Process Simulation. SAMPE Europe Conference 2020, 2020 more…
- Net-Shape Wet Compression Moulding. SAMPE Europe Conference 2020, 2020 more…
- Laser-assisted thermoplastic tape placement: Effects of consolidation roller diameter on wedge peel strength of CF/PA 6. SAMPE Europe Conference 2020, 2020 more…
2019
- Virtual Description of a Biaxial 0°/90° Non-Crimp Fabric with Normally Distributed Filament Directions. ESAFORM 2019 - 22th International ESAFORM Conference on Material Forming , 2019 more…
- Development of a Lightweight Carbon Composite Rocket Module with Integrated Fiber Optical Temperature Sensors as Part of the Experiment "TESOS" on REXUS23. 24th ESA Symposium on European Rocket & Balloon Programmes and Related Research, 2019 more…
- Comparing Test Methods for the Deformation Behavior of Uncured Prepreg Tapes. ACM4 - The Fourth International Symposium on Automated Composites Manufacturing, 2019 more…
- 3D Characterisation of carbon fibre reinforced composite microstructure via X-ray computed tomography. ICCM22 - 22nd International Conference on Composite Materials, 2019 more…
- Steel-CF/PA 6 hybrids manufactured by a laser tape placement process: Effect of first-ply placement rate on lap shear strength for garnet blasted substrates. SHEMET 2019 - 18th International Conference on Sheet Metal, 2019 more…
2018
- Online monitoring system for the tack of prepreg slit tapes used in automated fiber placement. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Towards a virtual characterization of biaxial non-crimp fabric. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- On the inter-stitch interaction in biaxial non-crimp fabrics. ESAFORM 2018 - 21th International ESAFORM Conference on Material Forming , 2018 more…
- Experimental analysis of the compaction behavior during thermoset automated fiber placement. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Influence of Prepreg Aging and Tack on Lay-Up Effects/defects in Thermoset Automated Fiber Placement. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Increasing permeability of dry-fiber-placed preforms. FPCM14 - The 14th international conference on flow processing in composite materials, 2018 more…
- A strategy for cost-effective compensation of process induced deformations in composite structures. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Investigating the use of friction to achieve ductility in composites. SAMPE Europe Conference 2018, 2018 more…
- Development of a novel type of online monitoring system for the braiding process. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Experimental investigation of the design concept for a non-engaging bellows coupling made of prepreg-based carbon fiber reinforced polymers. Hybrid - Materials and Structures 2018, 2018 more…
- Processing of (glass) fiber reinforced plastics with 2.45 GHz microwaves: current state, challenges and perspectives. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Virtual test bench to characterize load bearing behavior of laminates with out-of-plane ply deflections and localized wrinkles. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- Material Characterization for Compression Resin Transfer Molding Process Simulation. ECCM18 - 18th European Conference on Composite Materials, 2018 more…
- A contribution on TP AFP in situ consolidation processing and the opportunity to produce high performance composites in an additive manner. SAMPE Europe Conference 2018, 2018 more…
2017
- Towards a simulation strategy to predict laminate quality and porosity for partially impregnated CFRP prepregs. CamX 2017, 2017 more…
- Development, Manufacturing and Testing of CFRP Aluminum Hybrid Structures for Aerospace Applications. DLRK2017 - Deutscher Luft- und Raumfahrtkongress, 2017 more…
- Hybrid-matrix composites: materials and manufacturing. SAMPE 2017 - Society of the Advancement Material and Process Engineering, 2017 more…
- Fibre optical temperature sensor for distributed sensing in composite moulds. ICCM21 - 21th International Conference on Composite Materials, 2017 more…
- Calibration and uncertainty of a fibre optic measurement system for Fresnel reflectometer sensors. 25th International Conference on Optical Fiber Sensors, 2017 more…
- Forming behaviour and achievable part quality of thermosetting AFP-Towpreg-Laminates. SAMPE Europe Conference, 2017 more…
- Investigation of the effects of heating bias and placement head angle on the short beam strength of CF/PEEK laminates manufactured in a laser tape placement process. ACAM9- 9th Australian Congress on Applied Mechanics, 2017 more…
2016
- Development of a hybrid tail rotor drive shaft by the use of Thermoplastic Automated Fiber Placement. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Thermoplastic Automated Fiber Placement for manufacturing of metal-composite hybrid parts. Euro Hybrid Materials and Structures 2016, 2016 more…
- Numerical investigation of interference fit assemblies and the influence of varying the laminate thickness. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Strategies to increase the mechanical performance of long fiber patch preforms. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Development, manufacturing and testing of a CFRP metal hybrid gripper for highly dynamic manipulation processes. Euro Hybrid Materials and Structures 2016, 2016 more…
- Shear-Out failure behaviour of surface structured metallic z-reinforcements for CFRP laminates and joints. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Investigation of thermal ageing of advanced CFRP tooling laminate by gas permeability. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Influence of textile architecture by processing carbon fiber based Non-Crimp Fabrics in automotive serial application using High-Pressure-RTM. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Challenges for Thermoplastic-Automated Fiber Placement (TP-AFP) with in situ consolidation on 3D parts. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Hybrid-matrix processing: How to co-inject multiple resin systems into one composite part. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Bending characterization of axis and off-axis fiber-reinforced hinges at large deflection. SAMPE 2016 - Society of the Advancement Material and Process Engineering , 2016 more…
- Measurement of fracture toughness for fiber tensile failure mode of UD composites under high rate loading. ICCS19 - 19th International Conference on Composite Structures, 2016 more…
- Measurement of fracture toughness for fiber compressive failure mode of UD composites under high rate loading. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Interface evaluation for efficient integration of manufacturing distortion simulation results in an industrial design process. SICOMP27 -27th Annual International SICOMP Conference, 2016 more…
- Pre-Assessment of distortion in frame-like composite structures for Industrial application. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- On the modeling of separation foils in thermoforming simulations. ESAFORM 2016 - 19th International ESAFORM Conference on Material Forming, 2016 more…
- Investigation on creation of fibrous rings and their influence on the braided perform quality. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Development, manufactuing and testing of a CFRP bellows coupling for powertrain applications. Euro Hybrid Materials and Structures 2016, 2016 more…
- In-Situ observation of bubble formation in neat resin during the curing process by means of X-ray computed tomography. WCNDT 2016 - 19th World Conference on Non-Destructive Testing , 2016 more…
- Use of recycled (carbon) fibers in wetlaid-nonwovens - Current status, potentials and ongoing research efforts. CAMX 2016 - The Composite and Advanced Materials Expo, 2016 more…
- Towards thermoplastic carbon fiber reinforced plastics for the automotive industry - The need for and potential of fusion bonding and hybridization. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Experimental Investigation of inter-layer thermal contact resistance and its relevance for consolidation of thermoplastic composites. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Manufacturing CFRP sandwich parts using wet moulding. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- New production process for manufacturing continuous fiber-reinforced thermoplastic hollow profile components. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
- Selective reinforcment of steel with CF/PA6 composites in a laser tape placment process: Effect of surface preparation and laser angle on interfacial bond strength. ECCM17 - 17th European Conference on Composite Materials, 2016 more…
2015
- Research on development of Liquid Composite Molding parts: situation & framework. ICoRD'15 - 5th International Conference on Research into Design, 2015 more…
- Influence of braid set up and roving size to mechanical properties of biaxial carbon fiber braids. Polymer Processing Society Conference (PPS) 2015, 2015 more…
- Modelling of propagating delaminations in textile reinforced duroplast beams by an enriched shell element formulation. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Characterization of thermoplastic/thermoset combinations - potential application for joining. SAMPE Europe Conference 15 Amiens, 2015 more…
- Design of Through Thickness Reinforced Composite/Metal Joints - With the Help of Finite Element Analysis and Quasistatic Testing Using Digital Image Correlation. CAMX 2015 - The Composites and Advanced Materials Expo, 2015 more…
- Through Thickness Reinforced Composite/Metal Joints - The Impact of the Pinning Technology on The Joint's Tensile Strength. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Evaluation of an analytical analysis method for interference fit assemblies focusing on thick-walled parts based on experimentel data. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Simulation and testing of adaptive FRP- substructures for automotive safety. 24th International Technical Conference on the Enhanced Safety of Vehicles (ESV), 2015 more…
- A numerical approach modeling the braiding process for arbitrary mandrel shapes to calculate preform properties. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Wetlaid nonwovens made from recycled carbon fiber for automotive applications. SAMPE Baltimore 2015, 2015 more…
- A stochastic approach to model void formation during Out-of-Autoclave prepreg consoldiation. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Cutting strategies of long fiber patch preforms for structures with complex fiber architecture. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Successful development and monitoring of CRFP manufacturing technologies. 64. Deutscher Luft- und Raumfahrtkongress 2015, 2015 more…
- Successful development and monitoring of CFRP manufacturing technologies. 66th International Astronautical Congress, 2015 more…
- Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints. SAMPE Baltimore 2015, 2015 more…
- Investigation on the mechanical robustness of CFRP molds. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Method for the production of braided CFRP bicycle rims. SAMPE Europe Conference 15 Amiens, 2015 more…
- A process modeling toolkit developed to address scale-up challenges of Out-of-Autoclave manufacturing. CAMX 2015 - The Composites and Advanced Materials Expo, 2015 more…
- Hybrid-matrix approach: How to overcome the conflict of the matrix selection? Polymer Processing Society Conference (PPS) 2015, 2015 more…
- Experimental investigation of the failure envelope of unidirectional carbon-epoxy composite under high strain rate transverse and off-axis tensile loading. 11th International DYMAT Conference, 2015 more…
- Disassembly of fusion-bonded thermoplastic composite structures. Second European Symposium on Aircraft Recycling , 2015 more…
- A continuum damage approach for an efficient ultimate failure analysis with layered shell elements. 5th ECCOMAS Thematic Conference on Mechanical Response of Composites, 2015 more…
- Laminate damage model for CFRP structures. ICCST/10 - 10th International Conference on Composite Science and Technology, 2015 more…
- Characterisation of tensile properties perpendicular to fibre direction of a unidirectional thermoplastic composite using a Dynamic Mechanical Analysis system. ESAFORM 2015 - 18th International ESAFORM Conference on Material Forming , 2015 more…
- Shear characterisation of unidirectional thermoset pre-impregnated composites using a rheometre. 19èmes Journées Nationales sur les Composites, 2015 more…
- Structural analysis of composites considering manufacturing constraints. ICCS18 - 18th International Conference on Composite Structures, 2015 more…
- Flow front and cure monitoring with fibre optic sensors for thick CFRP laminates. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Characterization of unidirectional carbon fiber reinforced polyamide-6 thermoplastic composite under longitudinal compression loading at high strain rate. 11th International DYMAT Conference, 2015 more…
- Influence of different sizing on fracture toughness and flexural properties of carbon fiber reinforced polyphthalamide. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Interlaminar Fracture Toughness of Carbon Fiber Reinforced Thermoplastic In-situ Joints. Polymer Processing Society Conference (PPS) 2015, 2015 more…
- Comparative Study on Internal and External Release Agents - Evaluation of Process Parameter Variation on Demolding Stresses. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Materialcharacterization for determining the consolidation properties of carbon fiber tapes with PA 6 matrix. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
- Influence of the stacking sequence on the nonlinear material behvior of composite laminates related to large deformations. ICCST/10 - 10th International Conference on Composite Science and Technology, 2015 more…
- Adjustment of 2.45 GHz Microwave Absorbing Heating Layers for Tooling Applications. Polymer Processing Society Conference (PPS) 2015, 2015 more…
- Einsatz wirrfaserverstärkter Duroplaste in thermomechanisch belasteten Strukturbauteilen im Fahrzeugbau. 42. Tagung DVM-Arbeitskreis Betriebsfestigkeit, 2015 more…
- Modelling and simulation of randomly oriented carbon fibre-reinforced composites under thermal load. MPPE 2015 - International Conference on Materials, Processing and Product Engineering 2015, 2015 more…
- Characterization and numerical investigation of an RTM cure process with CFRP molds and independent heat patches. ICCM-20 - 20th International Conference on Composite Materials, 2015 more…
2014
- A continuum damage model considering ply waviness. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 more…
- Joining techniques in multi-ply preforming operations - characterization and modelling for virtual forming. 63. Deutscher Luft- und Raumfahrtkongress 2014, 2014 more…
- Textile development: highly drapable, contoured textiles for composite parts. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 more…
- Analysis of the cost efficiency of Automated Fiber Placement based on an extensive process breakdown. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 more…
- Wetlaid nonwovens as a resource-efficient manufactured semifinished product for composite structures made from recycled carbon fibers. CRETE 2014 - 4th International Conference on Industrial and Hazardous Waste Management, 2014 more…
- Highly efficient production and characterization of CFRP made from recycled carbon fibers. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 more…
- Process Induced Deformations - A study on sandwich panels. SAMPE Seattle 2014, 2014 more…
- Thermoplastic in situ fiber placment for future solid rocket motor casing manufacturing. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 more…
- Impact of air evacuation in Out-of Autoclave flow & compaction modeling. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Air evacuation in consolidation modeling of Out-of-Autoclave prepregs. FPCM12 - 12th International Conference on Flow Processing in Composite Materials, 2014 more…
- Experimental characterisation and modelling of non-linear stress-strain behaviour and strain rate effects for unidirectional carbon-epoxy. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Disassembly of fusion-bonded thermoplastic composite structures. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 more…
- Thermal simulation of the Automated Fiber Placement process and its validation. 8. Internationale CFK-Valley Stade Convention, 2014 more…
- Flexural characterisation of unidirectional thermoplastic tapes using a Dynamic Mechanical Analysis system. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Finite Element mapping for a structural analysis of composites. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Online Tow spreading in the braiding process. SEICO 14-35th International Technical Conference & Forum "Low Cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic", 2014 more…
- Novel environmentally friendly manufacturing approach for thermoplastic composite helicopter doors. Greener Aviation 2014 Conference, 2014 more…
- Verification of Flowtex solver using Ansys CFX - examining the permeability prediction method on a range of textile architecture models. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Evaluation of tooling concepts for the use in microwave processing of fiber reinforced plastics. SAMPE Europe SETEC 14 - Efficient composite solutions to foster economic growth, 2014 more…
- Fast and efficient permeability and compaction characterisation of dry textiles: considerations for a proposed technique. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
- Design and analysis of a carbon fiber braided stabilizer bar. The 63rd World Congress on Carbon (Carbon2014) - Carbon Materials for Ubiquitous and Sustainable Life, 2014 more…
- Non-linear mechanical response of triaxial braided composites under tension. ECCM16 - 16th European Conference on Composite Materials, 2014 more…
2013
- Novel injection process for long fiber composites using rotation. ICCM19 - 19th International Conference on Composite Materials, 2013 more…
- Validation of local stitching simulation for stitched NCF ply stacks. ICCM19 - 19th International Conference on Composite Materials, 2013 more…
- Stoffschlüssiges Fügen von Aluminium und CFK durch die Epoxidharz Matrix für die Herstellung hybrider Strukturbauteile. DGM - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013 more…
- Predicting the constitutive behavior of biaxial braided composites using beam unit cells. ICCM19 - 19th International Conference on Composite Materials , 2013 more…
- Off-axis testing of biaxial braided composites. TexComp-11, 2013 more…
- Consistent virtual CFRP process chain using a modular CAE interface. NAFEMS World Congress, 2013 more…
- Effects of fiber damage on the efficiency of the braiding process. TexComp-11, 2013 more…
- A simulation approach of permeability determination using computed tomography scans. TexComp-11, 2013 more…
- An approach towards a basic materials characterization for the simulation of Process Induced Deformations. ICCM19 - 19th International Conference on Composite Materials, 2013 more…
- Investigation of static and dynamic failure behaviour of composite T-joints. Composites 2013 - 4th ECCOMAS Thematic Conference on the Mechanical Response of Composites, 2013 more…
- Experimental investigation of heat transfer during thermoset Automated Fiber Placement. SEICO13 - 34th International Technical Conference & Forum "Advanced Composites on its way to industrialization", 2013 more…
- Investigation of influencing parameters with respect to filling time in vibration assisted RTM processes. ICCM19 - 19th International Conference on Composite Materials, 2013 more…
- Investigation of the shear thinning behavior of epoxy resins for utilization in vibration assisted Liquid Composite Molding processes. PPS29 - 29th International Conference of the Polymer Processing Society, 2013 more…
- A novel composition for removable internal tooling of hollow composite structures. ICCM19 - 19th International Conference on Composite Materials , 2013 more…
- Damage characterization of triaxial braided composites under tension using full-field strain measurement. ICCM19 - 19th International Conference on Composite Materials, 2013 more…
- Development, implementation and demonstration of a composite tool chain for concurrent engineering. CFK Valley Stade Convention, 2013 more…
- Development, implementation and demonstration of a composite tool chain for concurrent engineering. NAFEMS World Congress, 2013 more…
2012
- Material modeling of 2x2 braided composites using a beam approach. ECCM15 - 15th European Conference on Composite Materials, 2012 more…
- Efficent generation of the voxel description of textile geometries for the computation of the permeability. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 more…
- A numerical method of permeability determination for RTM process simulation. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 more…
- Investigation of critical fiber length in phenol matrix based short fiber CFRP. ICACC´12 - 36th International Conference and Expo on Advanced Ceramics and Composites, 2012 more…
- Braiding a convertible windscreen frame with concave sections. JEC Composites Magazine # 74, 2012 more…
- Online process monitoring systems - benchmark and test study. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 more…
- Uncertainty quantification in Liquid Composite Moulding processes. FPCM11 - Eleventh International Conference on Flow Processes in Composite Materials, 2012 more…
2011
- New material and design studies of wind turbine blades. Haus der Technik - 3rd Technical Conference "Wind Turbine Rotor Blades", 2011 more…
- Parameter study of short fiber carbon reinforced carbon. ICCM18 - 18th International Conference on Composite Materials, 2011 more…
- FE-simulation of the diaphragm draping process for NCF on a macro-scale level. AIP Conference, 2011 more…